|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-08-2019, 09:15 AM | #1 |
Getting Wild
Join Date: Oct 2008
Location: SE of the Indy 500
Posts: 92
|
Installing 1 White Rodgers Solenoid G1
Hi guys,
I've read through the posts in the G1 Sticky on some of the wiring for the WR solenoids. My question is what do you do when you replace one solenoid? The WR solenoid only has 1 stud and there are two spades on the original. Anyone have info on installing just one? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-08-2019, 09:46 AM | #2 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: Installing 1 White Rodgers Solenoid G1
try reading through this and see if it helps, I know it can be done but not exactly how to wire it up.
http://www.buggiesgonewild.com/gas-y...id-please.html someone of the G1 G3 facebook page recently did this but i dont recall how he wired it up. |
|
|
Similar Threads | ||||
Thread | Forum | |||
White Rodgers Solenoid for G1 | Gas Yamaha | |||
White Rodgers 586-117111 wiring | Electric EZGO | |||
36v non DCS white rodgers solenoid cross reference question | Electric EZGO | |||
White Rodgers Solenoid for Yamaha | Golf Carts and Parts | |||
white rodgers wiring | Electric EZGO |