Why I'm not on here much

[Andy4639]

Originally Posted by mazdawg(Mikey)

my dad had an all original 67 cst that had a big back window back in the late 80s to early 90s when he gave it to my brother. it was unmolested and numbers matching.

Does he still have it?

[OUTL4W]

some pretty kool cars...Ive been working off/on on my 39 chevy coupe with a 455ci. I'm just having trouble with the **** window mechanisms.

[Andy4639]

Originally Posted by OUTL4W

some pretty kool cars...Ive been working off/on on my 39 chevy coupe with a 455ci. I'm just having trouble with the **** window mechanisms.

I have fixed both the front windows in the 64 Impala SS and I just finished the 56 2.

[Andy4639]

I've been working on the Ramp Rat for the last few days. I got the brake booster installed the heater fan working and cleaned out all the crap in the heater box. Pulled the ash tray out and got it cleaned up and the rollers rolling again. Just trying to get it in good working condition for now
I changed the steering wheel out got the horn working and took the nasty old radio out. Put the new aluminum Radiator in with over flow catch bottle.
Thinking about ordering the 16" wheel covers for it.
A buddy of mine has a factory tilt wheel for it and dash pad I'm picking up next week also.
I drove it yesterday to a guy's house to work on his cart. It drove good but I got to bleed the brakes good and check them it's pulling to the right hard.

[smokindawg]

Andy, that's a good looking truck........ Is it just a ramp type deck or is it a roll back?

[Andy4639]

Originally Posted by smokindawg

Andy, that's a good looking truck........ Is it just a ramp type deck or is it a roll back?

It's just a ramp. It has the ramps stored under the bed. I have been working on it the past weekend. I took the heater core out and pick a new one up tonight I hope. Got it all cleaned out had a bunch of leaves and trash inside it.

[mike_dmt]

Any update on these?

[Andy4639]

Originally Posted by mike_dmt

Any update on these?

Mike I have been working pretty steady on my 64 SS Impala for the past few weeks. I did get the door panels in the ramp truck though. Once I finish the Impala I plan to start on the truck again.
I've had the dash and steering column out of it to add the factory tach and fix the AC vent that was broke. Since I had to take the steering column out to get the dash out I figured I may as well swap in a factory tilt column also.I then decided to install the under dash wiring harness I had with new fuse box. I'm waiting on my gasket and all new LED bulbs for the dash lights so I can reinstall it all.

[Andy4639]

I've been working on the trunk also fixing all the leaks with the gasket and adding LED tail lights.
I also painted it with bed liner the splatter painted it.
I did all the paint work to the dash tach and the trunk my self also.

You Tube

You Tube

[Andy4639]

I also been to the C10 Nationals with my red 71 truck and got in the top 25 of the show.
There was 100 trucks there.