11-01-2018, 05:05 PM | #1 |
Gone Wild
Join Date: Dec 2015
Location: Alabama
Posts: 226
|
Rack and Pinion
I'm building a custom kart using my 2006 EZGO TXT as the donor. I'm doing a right hand drive build which requires me to place the rack and pinion in the front. This is my first attempt at anything like this, so it has been a learning experience the entire way.
I'm looking for ideas on how to setup the rack and pinion. I'm including a few pictures. Any help will be appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2018, 06:01 PM | #2 | |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Rack and Pinion
Quote:
Your doing a great job with your control arms, mine are simple, looks like your using air bags. When you make your steering column be sure you keep the u-joints lined up and timed so there's no hard spots in the steering. |
|
11-01-2018, 07:08 PM | #3 |
Gone Wild
Join Date: Dec 2015
Location: Alabama
Posts: 226
|
Re: Rack and Pinion
Thanks for the input. How does extending the spindle arms and adding the spacer affect the movement? I have to run my rack up front because I'm flipping it due to the right hand drive, so I'm thinking about extending the arms coming off the spindles and adding spacers.
|
11-01-2018, 07:17 PM | #4 |
Gone Wild
Join Date: Dec 2015
Location: Alabama
Posts: 226
|
Re: Rack and Pinion
There was a lot of trial and error getting the control arms right. I made them too long to start with and slowly started cutting them down until they worked the way I needed them too. I'm actually working on getting the correct angle for the bottom and top bag plates now. This is another reason I'm trying to get ideas on the rack and pinion, so I can figure out how much room I have to work with.
|
11-03-2018, 02:01 PM | #5 |
Gone Wild
Join Date: Dec 2015
Location: Alabama
Posts: 226
|
Re: Rack and Pinion
I ordered a different rack and pinion setup. I believe that this will fix my problem.
https://www.dansperformanceparts.com...nion-each.html Sent from my Pixel 2 XL using Tapatalk |
11-03-2018, 05:51 PM | #6 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Rack and Pinion
This is the unit I got. When I ordered I wasn't expecting much for the price -- I was amazed with the quality. If it is going to show the one you've got sure is pretty. Pricey too. I love billet made parts. Mine is hid underneath - functionality is most important for me. With a 17 inch steering wheel it's like power steering.
https://www.ebay.com/itm/STEERING-GE...frcectupt=true |
11-03-2018, 05:56 PM | #7 | |
Gone Wild
Join Date: Dec 2015
Location: Alabama
Posts: 226
|
Re: Rack and Pinion
The one I have now is very similar to the one you have. You can see it in my picture above. I'm having clearance issues with it, which is why I'm going to try the new one. I'm hoping the new one gets me passed this point. I'm about 6 months into this build and I've basically hit a road block with the steering.
Quote:
|
|
11-03-2018, 06:17 PM | #8 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Rack and Pinion
People don't realize how hard it is to build a functional front suspension, first it has to work and second it must be fully adjustable. I like your air bag idea - I've been into big trucks all my life and if you use a quick release valve you can dump the air almost instantly. What type compressor are you using? What type air tank do you have?
|
11-03-2018, 06:20 PM | #9 | |
Gone Wild
Join Date: Dec 2015
Location: Alabama
Posts: 226
|
Re: Rack and Pinion
I've got 2 ViAir 444c compressors and an air zeith tank. I'm also running an Accuair VU4 for air management.
Quote:
|
|
11-04-2018, 11:27 AM | #10 |
Gone Wild
Join Date: Jun 2009
Location: Oregon
Posts: 230
|
Re: Rack and Pinion
I did the RHD a little while ago. Check out post 74 here http://www.buggiesgonewild.com/lifte...g-block-3.html
Maybe you can find something useful. Looks nice so far! |
Tags |
bagged, control arms, ezgo 2006, rack and pinion |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G16 Rack and Pinion mod | Lifted Golf Carts | |||
Par Car Rack and Pinion wanted | Gas Columbia ParCar | |||
8.5" rack and pinion???? | Lifted Golf Carts | |||
Rack & Pinion | Lifted Golf Carts | |||
Rack and Pinion Rebuild | Electric EZGO |