RoyPow charging

[jonr3]

I bought the 105Ah RoyPow lithium and it came with its own charger. I read that charging a lithium battery to a full charge, as well as discharging to nearly no charge, is not good for lithium batteries.

However, the charger that came with it, although the instructions are very minimal, basically says to charge it until the charger stops - a full charge.

What do you lithium gurus suggest?

FWIW: The instructions say:

Charging program consists of 3 steps: constant current, constant voltage, and float charging. The charger provides protections against overload, over-voltage, over-heating, short circuit and reverse polarity connections.
Green LED blinking - the charger is ready to charge
Red LED blinking - the charger is charging
Green LED constant - the charging process is finished

[MCortesEsq]

The charger that comes with it automatically stops at 91% charge

[jonr3]

Originally Posted by MCortesEsq

The charger that comes with it automatically stops at 91% charge

Good to know - thanks!

[rcarr13]

Jonr3,

Does the charge you have connect directly to your battery or through the carts charging port?

[jonr3]

Originally Posted by rcarr13

Jonr3,

Does the charge you have connect directly to your battery or through the carts charging port?

Through the stock charging port.