What kind of cart did i pick up? (Picture)

[wwillmon]

Hey guys,

Just picked up a new EZ GO cart. I looked at the manufactures code and serial number. The last 2 of the manuf. code is 01 so i am assuming its a 2001? From what i have read it seems there was the medalist and TXT models in 2001, how can i tell which model i have? [IMG]

[pachanga90]

Yours is a TXT. The Medalist is similar,but has a steel-body and was only made from 94.5 thru 95.Then they switched to the TXT(plastic-body).If its' an 01',t should have the steering rack mounted to the front-axle.Looks decent from the pics.

[scottyb]

Series TXT
What is the manufacture code?
The last 2 digits of the code tell the year it was made.

[speedgolfer]

nice cart enjoy

[wwillmon]

Thanks ill have to check the manuf. code again tomorrow. I'm pretty sure though it says 01. Already have it stripped to the frame. It was used at a landscaping company so it's filled with dirt so i power washed it one and gonna power wash it again tomorrow. Check out the batteries and possibly upgrade the motor. Then gonna lift it and add a new body and hopefully have a nice of a cart as you guys on here.

[dmi518]

Enjoy the build ,its a lotta fun keep the pics coming

[wwillmon]

Seems to be a problem with getting It to run, I knew I might have this problem when I picked it up. But the batteries are pretty new. When I push the gas I can hear the solenoid clicking. I've been searching on her for what to check, but I have no clue. Any help?

[kgsc]

What boxes do you have under the seat and where is the shift lever ? If it is by your right calf, when you lift the seat is there a rod from it to another small box or something that looks like a flat hockey puck ? And is there a run/tow switch on the controller cover..

[wwillmon]

You'll have to bear with me I've never worked on one before. The shift lever is to the right of my calf. It goes to a rod that connects to some sort of metal piece. I'm not positive where the controller is, like I said I've never worked on one. So you may have to explain. The batteries though are 6 volt super start fleet and heavy duty.

[wwillmon]

I've checked the micro switch as well and it seems it's still good. I have another ez go with a rusted out frame and bad body, so I'm gonna pull the controller and solenoid off of it and see if I get anything.