|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
02-29-2020, 09:55 AM
|
#1 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Tapered clutch adapter problem
Hi I just recently bought a gas Yamaha g9 that I'm installing a 18hp Briggs in. I'm having trouble with the adapter. I drilled and tapped the 1 inch shaft and cut to the length of the adapter. Here is my issue I can't get the clutch tight to the engine(doesn't slide all the way down the adapter) there's still a 1/2 inch of the adapter showing. This is causing me alignment issues. I'm using a team clutch from a g29 on the briggs.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-29-2020, 09:56 AM
|
#2 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: Tapered clutch adapter problem
The adapter is tight to the shoulder of the crank so I know that's as far in as possible.
|
|
|
|
|
02-29-2020, 10:19 AM
|
#3 |
|
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: Tapered clutch adapter problem
Got a pic?
|
|
|
|
|
02-29-2020, 11:07 AM
|
#4 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,436
|
Re: Tapered clutch adapter problem
Are you sure the clutch you are using has the same taper? Did you try and fit the adapter inside the clutch while it's on the bench? Not tapered clutches are the same. Should be a 30mm taper.
Post a pic of both apart and both mated together. |
|
|
|
|
02-29-2020, 11:56 AM
|
#5 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: Tapered clutch adapter problem
The clutch from the g29 drive is a 30mm taper. The adapter says it's for a 30mm taper also. I will take some pics and send them thanks guys for the help. Also I will try the bench test.
|
|
|
|
|
02-29-2020, 11:58 AM
|
#6 |
|
Gone Wild
Join Date: Nov 2009
Location: mi
Posts: 766
|
Re: Tapered clutch adapter problem
Also does anyone know off hand which lead is the charging lead off this engine? It has the silver box with 2 yellow wires and a red wire coming from it.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| tapered clutch adapter | Golf Carts and Parts | |||
| Tapered clutch adapter | Clone Engine Swaps | |||
| new tapered shaft clutch adapter/cant use it | Golf Carts and Parts | |||
| Tapered Clutch Adapter | Gas Club Car | |||
| Tapered shaft adapter | Big Block Talk! | |||
Linear Mode
