lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-25-2020, 05:14 PM   #1
dan.johnson1980
Not Yet Wild
 
Join Date: Mar 2020
Posts: 7
Default looking to send a curtis Controller to Bob Boyce!

Hey all! Im new here, but have been a lurker for a long time. was about to pull the trigger on a Navitas 600amp controller for my cart for speed. then started doing a little more reading here and found about the work Bob Boyce does. I have a second controller that i aquired from a wrecked 2014 RXV i bought from friend. i installed it in my cart to confirm it works.. and it does. I would like to get in the area of 38-40MPH, since all my buddies with txts are running around there.

I also would like group input on braking, as i know the motor it self does the braking, do i need to go into front disc brakes with a controller upgrade?

Thanks all. this is my first post, but I have been wanting to join for a while... never had an email address outside of google or hotmail for years!
dan.johnson1980 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-25-2020, 06:55 PM   #2
wjbjsmith
Not Yet Wild
 
Join Date: Mar 2020
Posts: 18
Default Re: looking to send a curtis Controller to Bob Boyce!

I just got my Bob programmed controller installed in mine and got 36mph with 6Ē lift and 23x10x14 tires. I noticed a huge increase in torque also. Good luck! Send it to Bob and donít look back. You will be impressed in sure!
wjbjsmith is offline   Reply With Quote
Unread 03-25-2020, 07:36 PM   #3
usgicollector
Gone Wild
E-Z-GO
 
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 1,713
Default Re: looking to send a curtis Controller to Bob Boyce!

Quote:
Originally Posted by dan.johnson1980 View Post
Hey all! Im new here, but have been a lurker for a long time. was about to pull the trigger on a Navitas 600amp controller for my cart for speed. then started doing a little more reading here and found about the work Bob Boyce does. I have a second controller that i aquired from a wrecked 2014 RXV i bought from friend. i installed it in my cart to confirm it works.. and it does. I would like to get in the area of 38-40MPH, since all my buddies with txts are running around there.

I also would like group input on braking, as i know the motor it self does the braking, do i need to go into front disc brakes with a controller upgrade?

Thanks all. this is my first post, but I have been wanting to join for a while... never had an email address outside of google or hotmail for years!
Your going to need three posts before you'll able to pm. You need to pm to be able to communicate.

Tell us more about your cart. Lifted or not, tire size, terrain, or a backseat.
usgicollector is offline   Reply With Quote
Unread 03-25-2020, 09:04 PM   #4
dan.johnson1980
Not Yet Wild
 
Join Date: Mar 2020
Posts: 7
Default Re: looking to send a curtis Controller to Bob Boyce!

Quote:
Originally Posted by usgicollector View Post
Your going to need three posts before you'll able to pm. You need to pm to be able to communicate.

Tell us more about your cart. Lifted or not, tire size, terrain, or a backseat.
Totally man! I have a 2014 rxv, 5 inch lift. 23 inch tires, back seat. I got it from a guy in a trade and switched the body out, added the lift myself. Then did the back seat. I have rock lights, headlights/taillights and turnsignals, bazooka party bar with self powered sub in the bag well.

It currently has freedom mode set on the controller in the cart. Its nice but I'm getting gassed by buddies in souped up txts. The terrain I ride is strictly streets and allies. I went with more AT tires over mud grips on tires. Smoother ride but has the look. Not alot of hills in my area of south Georgia!
dan.johnson1980 is offline   Reply With Quote
Unread 03-25-2020, 09:11 PM   #5
dan.johnson1980
Not Yet Wild
 
Join Date: Mar 2020
Posts: 7
Default Re: looking to send a curtis Controller to Bob Boyce!

usgicollector, you tune controllers as well correct?
dan.johnson1980 is offline   Reply With Quote
Unread 03-25-2020, 09:20 PM   #6
kgsc
Gone Wild
 
kgsc's Avatar
E-Z-GO
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 7,702
Default Re: looking to send a curtis Controller to Bob Boyce!

Unless it has the 350 Curtis I donít think Bob will touch it with that size tire.
kgsc is offline   Reply With Quote
Unread 03-25-2020, 09:41 PM   #7
dan.johnson1980
Not Yet Wild
 
Join Date: Mar 2020
Posts: 7
Default Re: looking to send a curtis Controller to Bob Boyce!

Quote:
Originally Posted by kgsc View Post
Unless it has the 350 Curtis I donít think Bob will touch it with that size tire.
Oh. I thought he did the 235 amps?
dan.johnson1980 is offline   Reply With Quote
Unread 03-25-2020, 10:24 PM   #8
kgsc
Gone Wild
 
kgsc's Avatar
E-Z-GO
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 7,702
Default Re: looking to send a curtis Controller to Bob Boyce!

He does modify the 235 amp controller but only up to 20.5Ē tires.
kgsc is offline   Reply With Quote
Unread 03-26-2020, 04:12 AM   #9
dan.johnson1980
Not Yet Wild
 
Join Date: Mar 2020
Posts: 7
Default Re: looking to send a curtis Controller to Bob Boyce!

Quote:
Originally Posted by kgsc View Post
He does modify the 235 amp controller but only up to 20.5Ē tires.
So I'm guessing I'm going to need to find a 350 amp controller. I can do that. Thanks for the input
dan.johnson1980 is offline   Reply With Quote
Unread 03-26-2020, 04:39 AM   #10
usgicollector
Gone Wild
E-Z-GO
 
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 1,713
Default Re: looking to send a curtis Controller to Bob Boyce!

Dan I sent you a pm.
usgicollector is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
I need bob boyce to program my controller. Electric EZGO
Bob Boyce programmed my 2016 rxv fleet curtis controller Electric EZGO
Is the Curtis 1311-1101 Controller Handset PMC a good controller Electric EZGO
Good place to send out a DCS controller to be rebuilt? Electric EZGO


All times are GMT -5. The time now is 02:58 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.