|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-22-2008, 07:20 PM | #1 |
Gone Wild
Join Date: Jan 2008
Posts: 151
|
Just bought new everything, the EZ-GO still won't go!!!
Lets see, I used this diagram:
http://www.buggiesgonewild.com/elect...-diagrams.html (The second one shown, the big one) Roady89 told me to use it I have a late 70s style 36V resistor cart... It is wired exactly to the diagram's specifications... (checked by me and 3 others, many times) I have 38V across the battery pack (brand new as of yesterday, 6.3V per battery, 90% charged) I have 1 ohm across two of the motor contacts I have 1400 ohms across the two other contacts (one of which is a direct ground to the battery) My solenoid won't activate, I am only getting 0.1 volts through the activation circiut, but no resistance (when eveything is turned on) The reverse buzzer works properly, and loudly... I have checked all the circuits again and again, no broken contacts, or even dirty ones... Batteries have proper water levels... I see no sparks (not even at night) when speed board changes speeds... The motor won't go at all... The motor won't even go when I bridge (bypass) the solenoid... It won't even go on jack stands!!! HELP ME PLEASE!!! If you need pictures or even video I can do that!!! Please, constructive criticism only, I put 3 months of work into this cart!!! |
|
|
Similar Threads | ||||
Thread | Forum | |||
I just bought this for my Workhorse | Big Block Talk! |