|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
03-03-2011, 06:31 PM | #1 |
Not Yet Wild
Join Date: Sep 2010
Location: cocoa Fl
Posts: 28
|
vanguard briggs 18hp idle problem
hi all,
i have had an 18hp in my DS for awhile and it has never idled right any help would be great.... if i idle it up where it will stay running i cant put it in gear? when its down low it only runs for a couple seconds then stalls |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-03-2011, 06:55 PM | #2 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: vanguard briggs 18hp idle problem
I'm no expert, but I'd have to think your drive belt is to tight. Get the number off your drive belt, maybe a picture or video of your set up and post it. A call to Tom at CPP (site sponsor) would help also. He is the "BigBlock Guru"
|
03-03-2011, 08:49 PM | #3 |
Not Yet Wild
Join Date: Sep 2010
Location: cocoa Fl
Posts: 28
|
Re: vanguard briggs 18hp idle problem
ok i just went thu the carb everything looks good and clean, took it apart blew it out put it back on same thing. i cant keep it idling under 1500rpm which is to high to put in gear. im going to try n get some pics of the set up i didnt think the belt was to tight but i dont really no what to tight is either
|
03-03-2011, 09:01 PM | #4 |
Not Yet Wild
Join Date: Sep 2010
Location: cocoa Fl
Posts: 28
|
Re: vanguard briggs 18hp idle problem
|
03-03-2011, 09:35 PM | #5 |
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: vanguard briggs 18hp idle problem
Motor should idle below 1500 all day long. I once forgot and left my wifes big block idle for 3 hours, never missed a beat. I usually set at 1000-1100 rpm either the mixture screw needs tweaked or idle passage is still blocked. When setting idle make sure you set it with the idle speed screw and leave a little slack in the cable.
|
03-04-2011, 05:52 AM | #6 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: vanguard briggs 18hp idle problem
My 18 vanguard idles at 990-1000 rpm.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Briggs 18HP Vanguard V-twin exhaust system or muffler needed. Where o I get it? | Big Block Talk! | |||
18hp Vanguard cam/starter problem | Big Block Talk! | |||
'03 EZ-GO/18hp. Vanguard | Big Block Talk! | |||
18HP Briggs & Stratton Vanguard 4-cycle motor | Big Block Talk! | |||
18hp Vanguard | Golf Carts and Parts |