|
06-27-2011, 10:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2011
Location: arizona
Posts: 2
|
swapping 250sx motor into 1989 ezgo - need advise
Hey guys i am new to the forums but i have an 89 ezgo golf cart with the 9hp motor. Well when i got it i thought it would be fine to drive around and tow the jet ski down to the water but the thing is a dog! So after lurking around the site i have decided to swap a 250sx motor into it.
I am going to look at the bike tomorrow but it runs and is shaft driven. I need help, advise and pictures. mounting the motor in is not a problem, but my main question is about the rear axle, i was thinking of using the one out of the bike. Any thoughts? Any help from the guys who have done this would be appreciated, pics are very helpful too. thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-27-2011, 10:31 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: swapping 250sx motor into 1989 ezgo - need advise
Why not just tow the jetski with the atv and sell the cart?
|
|
|
|
|
06-27-2011, 10:38 PM
|
#3 | |
|
Not Yet Wild
Join Date: Jun 2011
Location: arizona
Posts: 2
|
Re: swapping 250sx motor into 1989 ezgo - need advise
Quote:
|
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yahama G1 with a Honda 250sx motor | Golf Carts and Parts | |||
| Swapping out (upgrading) an EZ-GO Electric Motor | Electric EZGO | |||
| Honda 250SX motor engine rear end 4 ezgo yamaha golf cart SoCal | Golf Carts and Parts | |||
| Swapping controller from EZGO to CC | Electric EZGO | |||
| Swapping a shunt wound motor into a 1988 Marathon | Electric EZGO | |||
Linear Mode
