|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-04-2021, 12:34 PM | #41 | |
Not Yet Wild
Join Date: Dec 2021
Posts: 9
|
Re: axle bearing and seal replacement.
Quote:
image.jpgF324EBE5-BFAD-4179-8408-580817662EC4.jpg Here is a update: passenger side rear axle bearing was prefect to install : But driver rear axle bearing mystery grooves, bearings is too thick. See pictures F324EBE5-BFAD-4179-8408-580817662EC4.jpg image.jpg |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-16-2022, 08:59 PM | #42 | |
Not Yet Wild
Join Date: Nov 2022
Posts: 6
|
Re: axle bearing and seal replacement.
Quote:
|
|
02-01-2023, 02:46 PM | #43 |
Not Yet Wild
Join Date: Mar 2015
Posts: 10
|
Re: axle bearing and seal replacement.
i'm starting to replace my axle bearings on a 1994 electric marathon. I tried the reverse brake drum to get the axle out, no luck. I"ve ordered a slide hammer. The mfg repair manual says to screw the slide hammer into the threaded hole in the axle. i need to find what size the bolt is. so far i haven't found a bolt to fit it. Or could i leave my loosened brake hub on and connect the slide hammer to the lugnuts? thanks.
|
02-02-2023, 12:11 PM | #44 |
Not Yet Wild
Join Date: Mar 2015
Posts: 10
|
Re: axle bearing and seal replacement.
if you do use a slide hammer, what do you hook it to? 1994 electric marathon, my studs are on the brake drum. anyone know what size the screw hole is in the center of the axle. I read something saying screw the slide hammer end into that. so far i haven't gotten my axle out. it's cold and keeps raining.
|
02-02-2023, 12:59 PM | #45 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: axle bearing and seal replacement.
Most slide hammers come with a set of fingers or a bracket that screws on then you can hook that to the nut or hub.
|
02-02-2023, 03:50 PM | #46 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: axle bearing and seal replacement.
I made a slide hammer for Ezgo axles. I welded an axle castle nut on the end.
I have heard you can put the drum on backwards and thread the nut on leaving some space to use the drum as a slide hammer. Never tried it as I had a proper tool but it sounds like it would work. |
02-06-2023, 07:27 PM | #47 |
Not Yet Wild
Join Date: Mar 2015
Posts: 10
|
Re: axle bearing and seal replacement.
I got my axil out and finally the old seal off my 1994 marathon. everything seems hard on that golf cart. It has looks like iron filings in the axle housing. I thought it was dirt at first but it sticks to a magnet. how can i clean out the axle housing? thought about running a magnet inside the housing. don't want to knock the metal into the differential though. i'm going to change the fluid also when i get finished with the bearings.
|
11-10-2023, 10:28 AM | #48 |
Not Yet Wild
Join Date: Nov 2023
Posts: 20
|
Re: axle bearing and seal replacement.
|
01-13-2024, 06:53 AM | #49 |
Not Yet Wild
Join Date: Jan 2024
Location: Florida
Posts: 53
|
Re: axle bearing and seal replacement.
Using 90w made my cart much quite.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G1 seal replacement files | Gas Yamaha | |||
Axle Bearing | Electric Club Car | |||
louder exhaust after seal replacement | Gas Yamaha | |||
Bearing replacement | Electric EZGO | |||
g1 crank seal replacement | Gas Yamaha |