2017 Club Car Gas High Speed Gear install with PICS!!

[boosted230]

Hey guys, just finished installing my high speed gears. They only make one option for this rear end. I believe they are 9.5:1 or something like that.. was a pretty straight forward install. I’ll explain the pics in order:
1. Rear end removed
2. Comparison of gears.. stock one has the bearing on it still.
3. Rear end cases split and factory still installed.
4. Rear end cases split with high speed gears installed
5. Driver side of rear end, pretty much everything stays on the passenger side of the axle.

High speed gears include the largest gear in the pics and the one small gear that it touches. Now, the most important part the MPH. This is a 2017 Gas with the Subaru efi engine. It is your typical limo, (stock height) two rows forward and one rear facing seat. With the rear govoner bypassed the cart hits the electronic rpm limiter at 35mph. However, can cruise all day at 30-32mph. At around 25mph the engine is so quiet and much more pleasant to cruise around with than before. Hope this info helps. I could not find any info on this install so I wanted to share..