|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-23-2007, 05:48 PM | #1 |
Getting Wild
Join Date: Jul 2007
Location: Sylvania
Posts: 80
|
Carb Rebuild g9
So I ordered one of those 69.95 rebuild kits from LVS to freshen up my carb after sitting since the accident.i knew i needed a new o-ring(bowl gasket) we tore it down and cleaned every thing up put the new needle and seat and the new air and fuel vales etc.Put the carb back on and fired up the cart many hours later, i will tell what happened later but lets just say i decided to have my starter motor rebuilt also, anyway she would not fire unless you shot either in. I pulled it back apart and realized the needle was wrong and stuffed into the seat not letting fuel in, so i put the old one back in. then fired it up now it ran but not well the air mixture screw made little diffence and you had to keep pumping throttle to run. so after many hours of trying to get it to run wright I put the the original air needle and fuel screw back in yesterday now it runs perfect in fact I forgot how good they can run, Anyway i did end up using the oring for 69.95. LOL
http://warpaintweb.com/banditracing/golfkart.html |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-23-2007, 06:00 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Carb Rebuild g9
Man, that sucks!! Did you talk to LVS about sending the wrong parts? Glad to
hear you got it tuned back in. Do you have any pics of the damage from the accident? |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-23-2007, 06:14 PM | #3 |
Getting Wild
Join Date: Jul 2007
Location: Sylvania
Posts: 80
|
Re: Carb Rebuild g9
I havent found any yet I believe I had them on an old Computer that crashed. But you can imagine a trailer flipping @ 50 mph on top of it.
|
08-23-2007, 06:38 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Carb Rebuild g9
I hate to think about it. I may not have looked at the pics!! LOL
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-23-2007, 06:51 PM | #5 |
Getting Wild
Join Date: Jul 2007
Location: Sylvania
Posts: 80
|
Re: Carb Rebuild g9
Thats Funny, Hey I forgot to tell you the used parts place think they have the pillars He thought at first i was looking for just the covers, I told him hell no i can buy those new LOL He will look and call me tomorrow, So I gotta think you guys for the lead
|
08-23-2007, 06:58 PM | #6 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Carb Rebuild g9
Great!! I hope it works out. I never thought they would be this hard to find.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-23-2007, 07:05 PM | #7 |
Getting Wild
Join Date: Jul 2007
Location: Sylvania
Posts: 80
|
Re: Carb Rebuild g9
Yeah I have been buying parts for over a year, man thats hard to beieve, my wife cant figure out why i didnt buy a new cart LOL
|
08-23-2007, 07:24 PM | #8 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Carb Rebuild g9
LOL...Some things they just don't understand!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-23-2007, 07:35 PM | #9 |
Getting Wild
Join Date: Jul 2007
Location: Sylvania
Posts: 80
|
Re: Carb Rebuild g9
YEAh And Ron I did this for 12 years without complaints
http://www.geocities.com/jbandit33/ |
08-23-2007, 07:44 PM | #10 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,047
|
Re: Carb Rebuild g9
Totally cool Jeff!! Why did you stop??
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|