wtb steering parts

cajun cartman · 07-28-2010, 01:36 PM

i just got a 97 ezgo txt . it has a lift of some sort on it but im looking to change it out to a spindle lift . im looking for any used stock front end parts to change out the ones that are on there . thanks

scottyb · 07-28-2010, 01:43 PM

Not sure of what you need? Can you post a pic of what you got and we can go from there. Lots of members with stock front ends left over from drop axle lifts, I guess.

cajun cartman · 07-28-2010, 02:13 PM

it is a drop axle lift cause the axle ends are curved down . i would like to change that and go with a spindle lift instead .

csason · 07-28-2010, 06:48 PM

Aw man.. perfect !!

I will trade you every bit of my stock front end for yours..

done deal.

I have a 98 Workhorse, everything should swap right out, I am taking it off
tomorrow anyway..so all we have to do is work out the shipping..

cajun cartman · 07-29-2010, 06:53 PM

sounds like a good deal but the reason i want to change it is because the part of the lift that goes on the spindle was welded . when i got it , the weld were broke . i welded them back but they keep breaking . thats why i rather the spindle lift . it seems to be stronger .

csason · 07-30-2010, 08:21 AM

I am not sure which part you are talking about..
but I took my stock axle off yesterday. I will take a picture of it
later and show you this evening .. It will fit right on your cart, and
you can get your spindle lift and it will go right on..Then, you can take the
box I send it to you in, put your axle in it, and send it to me..

Sound like a plan ? I will ship it Monday morning, if you want..
just p.m. me your shipping address and it's a done deal.

I need to keep my stock spindles and such..so hope that's not a problem.

csason · 07-30-2010, 08:24 AM

oh yeah..and the part you're talking about..if it is the part that
attaches to the tie rod, I will need it..it's like and adapter I think , between the
spindle steering bar and the tie rod..Is that the part that breaks ??

There should be one on each side if it's what I am thinking..it's part of the
drop axle set up... I will sort of need those also..

Just let me know..

later

rabbitreborn · 07-30-2010, 11:41 AM

Judging from the pictures I have seen of the pieces that he has that keep breaking loose, you might be better off ordering a new set of adapters from Jakes. The Spindles you already have from your stock setup, you should only need the actual drop axle and then order a new set of riser adapters from Jakes to complete the lift.

Since he is going to go to a spindle lift, it would be easiest to just swap axle between the 2 of you.

csason · 07-30-2010, 06:53 PM

Quote:

Originally Posted by rabbitreborn

Judging from the pictures I have seen of the pieces that he has that keep breaking loose, you might be better off ordering a new set of adapters from Jakes. The Spindles you already have from your stock setup, you should only need the actual drop axle and then order a new set of riser adapters from Jakes to complete the lift.

Since he is going to go to a spindle lift, it would be easiest to just swap axle between the 2 of you.

Yep ! Jakes wants a few bucks for those...mmm mm, but that may be
what I end up doing, anyway, Cajun Cartman..here is the axle I pulled.
I am trying to adapt a four wheeler front clip to mine this weekend, so that is
why I have it out.

csason · 07-31-2010, 05:17 PM

So I guess that is all a big "no" then I take it cajun cartman ?

It really does not matter to me at all.. I was about to buy a replacement
drop axle, and I will just throw this straight stock Workhorse axle under the
shed..mm mmm

Let me know if you still want it..

07-28-2010, 01:36 PM	#1
cajun cartman Getting Wild Join Date: Jul 2010 Location: cajun country , LA Posts: 92	wtb steering parts i just got a 97 ezgo txt . it has a lift of some sort on it but im looking to change it out to a spindle lift . im looking for any used stock front end parts to change out the ones that are on there . thanks

07-28-2010, 01:43 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: wtb steering parts Not sure of what you need? Can you post a pic of what you got and we can go from there. Lots of members with stock front ends left over from drop axle lifts, I guess.

07-28-2010, 02:13 PM	#3
cajun cartman Getting Wild Join Date: Jul 2010 Location: cajun country , LA Posts: 92	Re: wtb steering parts it is a drop axle lift cause the axle ends are curved down . i would like to change that and go with a spindle lift instead .

07-28-2010, 06:48 PM	#4
csason Love my Big Block Join Date: Oct 2009 Location: Florida Posts: 1,553	Re: wtb steering parts Aw man.. perfect !! I will trade you every bit of my stock front end for yours.. done deal. I have a 98 Workhorse, everything should swap right out, I am taking it off tomorrow anyway..so all we have to do is work out the shipping..

07-29-2010, 06:53 PM	#5
cajun cartman Getting Wild Join Date: Jul 2010 Location: cajun country , LA Posts: 92	Re: wtb steering parts sounds like a good deal but the reason i want to change it is because the part of the lift that goes on the spindle was welded . when i got it , the weld were broke . i welded them back but they keep breaking . thats why i rather the spindle lift . it seems to be stronger .

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-30-2010, 08:21 AM	#6
csason Love my Big Block Join Date: Oct 2009 Location: Florida Posts: 1,553	Re: wtb steering parts I am not sure which part you are talking about.. but I took my stock axle off yesterday. I will take a picture of it later and show you this evening .. It will fit right on your cart, and you can get your spindle lift and it will go right on..Then, you can take the box I send it to you in, put your axle in it, and send it to me.. Sound like a plan ? I will ship it Monday morning, if you want.. just p.m. me your shipping address and it's a done deal. I need to keep my stock spindles and such..so hope that's not a problem.

07-30-2010, 08:24 AM	#7
csason Love my Big Block Join Date: Oct 2009 Location: Florida Posts: 1,553	Re: wtb steering parts oh yeah..and the part you're talking about..if it is the part that attaches to the tie rod, I will need it..it's like and adapter I think , between the spindle steering bar and the tie rod..Is that the part that breaks ?? There should be one on each side if it's what I am thinking..it's part of the drop axle set up... I will sort of need those also.. Just let me know.. later

07-30-2010, 11:41 AM	#8
rabbitreborn Gone Wild Join Date: Jun 2010 Location: Central Florida Posts: 2,757	Re: wtb steering parts Judging from the pictures I have seen of the pieces that he has that keep breaking loose, you might be better off ordering a new set of adapters from Jakes. The Spindles you already have from your stock setup, you should only need the actual drop axle and then order a new set of riser adapters from Jakes to complete the lift. Since he is going to go to a spindle lift, it would be easiest to just swap axle between the 2 of you.

07-31-2010, 05:17 PM	#10
csason Love my Big Block Join Date: Oct 2009 Location: Florida Posts: 1,553	Re: wtb steering parts So I guess that is all a big "no" then I take it cajun cartman ? It really does not matter to me at all.. I was about to buy a replacement drop axle, and I will just throw this straight stock Workhorse axle under the shed..mm mmm Let me know if you still want it..

Similar Threads
Thread	Forum
Many G1 parts,cowl,steering colum,complete rearend	Golf Carts and Parts
WANTED- Steering Box and Parts (club car 84+)	Golf Carts and Parts
Steering wheel column rebuild 'spare parts'	Electric Club Car
G1 steering gear box parts	Gas Yamaha
Steering Parts	Gas Columbia ParCar