Admiral MOT-B4 instal in TXT

[hawkgt]

Yesterday I installed a Admiral MOT-B4 in my TXT golf cart with previously upgraded to 48V, XCT controller and HD solenoid. The motor went in fine and I used the Alltrax Toolkit utility to upload the field map . My problem is with the speed sensor. I cut off the stock PDS speed sensor and the plug to the speed sensor installed on the B4 and spliced the two together but upon testing it is only running at ~5% power. If i unplug the speed sensor from the XCT it runs the same, ~5% output. If I disable the speed limit in the utility the motor operates at full power. I have it wired red to pink, black to black, white to green. I also tried 4 and 8 pole settings in the utility. Any suggestions other than running without the speed limit?