EZGO 36 volt won't move

drrv · 10-09-2012, 06:28 PM

I have a 95 ezgo 36 volt and when you step on the pedal it chatters.
I had the rear apart and didn't see any problems.
I bought another motor and I still have the same problem.
It moves slowly on the flat but stops under any load.

scottyb · 10-09-2012, 06:31 PM

Quote:

Originally Posted by drrv

I have a 95 ezgo 36 volt and when you step on the pedal it chatters.
I had the rear apart and didn't see any problems.
I bought another motor and I still have the same problem.
It moves slowly on the flat but stops under any load.

This is a battery problem. You have one or more bad batteries and the pack voltage is dropping under load.

drrv · 10-09-2012, 06:39 PM

I can also run with the charger plugged in and it still won't move under load.
can it still be batteries?
Thanks

drrv · 10-09-2012, 06:43 PM

Forgot to tell you, it does sound like the motor is still turning.

scottyb · 10-09-2012, 06:46 PM

Look at the axle nuts while somebody tries to make the cart go. If one of the axle nuts spins but the wheel stays still then you have a stripped hub.... other wise it's a battery or a high amperage connection?

drrv · 10-09-2012, 07:01 PM

Already checked the hubs they are ok. Going to load test the batteries and see what I have.
I will let you know what I find.
I couldn't be the input shaft could it?
Thanks so much
Mike

10-09-2012, 06:28 PM	#1
drrv Not Yet Wild Join Date: Oct 2012 Posts: 6	EZGO 36 volt won't move I have a 95 ezgo 36 volt and when you step on the pedal it chatters. I had the rear apart and didn't see any problems. I bought another motor and I still have the same problem. It moves slowly on the flat but stops under any load.
drrv Not Yet Wild Join Date: Oct 2012 Posts: 6

10-09-2012, 06:39 PM	#3
drrv Not Yet Wild Join Date: Oct 2012 Posts: 6	Re: EZGO 36 volt won't move I can also run with the charger plugged in and it still won't move under load. can it still be batteries? Thanks
drrv Not Yet Wild Join Date: Oct 2012 Posts: 6

10-09-2012, 06:43 PM	#4
drrv Not Yet Wild Join Date: Oct 2012 Posts: 6	Re: EZGO 36 volt won't move Forgot to tell you, it does sound like the motor is still turning.
drrv Not Yet Wild Join Date: Oct 2012 Posts: 6

10-09-2012, 06:46 PM	#5
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: EZGO 36 volt won't move Look at the axle nuts while somebody tries to make the cart go. If one of the axle nuts spins but the wheel stays still then you have a stripped hub.... other wise it's a battery or a high amperage connection?

10-09-2012, 07:01 PM	#6
drrv Not Yet Wild Join Date: Oct 2012 Posts: 6	Re: EZGO 36 volt won't move Already checked the hubs they are ok. Going to load test the batteries and see what I have. I will let you know what I find. I couldn't be the input shaft could it? Thanks so much Mike
drrv Not Yet Wild Join Date: Oct 2012 Posts: 6

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
96 48 volt wont move	Electric Club Car
1995 Ezgo 36 volt wont move	Electric EZGO
89 marathon, Move up to 42 volt?	Electric EZGO
48 volt cc wont move	Electric Club Car
ezgo 36 volt wont move	Electric EZGO