|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
|
04-30-2019, 09:40 PM | #1 |
Not Yet Wild
Join Date: Apr 2019
Location: Florida
Posts: 3
|
1988 DS - Buss bar
Hello! Newbie here. Just bought a 1988 Club Car DS. I'm trying to learn as much as I can.
Please see attached image. Is this copper bracket across the solenoids normal? Is it OEM? I'm just wondering if the seller did this to hide a non-functioning solenoid? He claimed the only modification he made was installing all new solenoids across the board. The cart also fails to reach speeds above 10.5 mph and I'm trouble shooting all I can to make sure this is normal. I was thinking 12-14mph would be more likely when I purchased the cart. Thanks in advance for any wisdom! |
04-30-2019, 11:31 PM | #2 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 1988 DS - Buss bar
That is your solenoid and resistor bank. It is factory installed.
You will not get a lot of speed out of that cart. |
05-01-2019, 10:12 AM | #3 | |
Not Yet Wild
Join Date: Apr 2019
Location: Florida
Posts: 3
|
Re: 1988 DS - Buss bar
Quote:
Sent from my SM-N950U using Tapatalk |
|
05-01-2019, 01:14 AM | #4 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: 1988 DS - Buss bar
Yep. Not modified, that's the way it was made. Speed is normal.
|
05-01-2019, 10:15 AM | #5 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 1988 DS - Buss bar
Not really as your limitation is not as much RPM related as it is with a Sepex cart. It would change the ratio (higher) but the biggest limitation is the toasters....
If you wanted to convert to an electronic system down the road, scottyb - Carts Unlimited does sell conversion kits. |
05-01-2019, 10:28 AM | #6 | |
Not Yet Wild
Join Date: Apr 2019
Location: Florida
Posts: 3
|
Re: 1988 DS - Buss bar
Quote:
I'm physically away from the cart and haven't had a moment to really dig in. Sent from my SM-N950U using Tapatalk |
|
05-01-2019, 02:58 PM | #7 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 1988 DS - Buss bar
Since your resistor bank has the solenoids installed, you should have a bank of micro-switches up stream from it.
|
Tags |
1988 club car, help needed, soleniod, soleniod wiring |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Going from 4 buss bar to 3 buss bar controller question | Electric EZGO | |||
99 TXT reducer/buss/fuse location? | Electric EZGO | |||
1988 ds | Electric Club Car | |||
F/R switch beef up buss bars | Electric EZGO | |||
alltrax buss fuse | Golf Carts and Parts |