|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-07-2016, 06:24 PM | #1 |
Gone Wild
Join Date: Dec 2015
Location: Texas
Posts: 526
|
About to upgrade DCS
I am about to upgrade and asking final questions... I have posted before and given advice and want to make sure I don't miss anything.
I have a stock EZGO 98 DCS I think it gets about 12 plus mph now. We are on flat flat flat ground in Texas. I am going to order DCX400 for DCS, MZJ-200 Main Contactor - 36 Volt solenoid, and complete set of 4 gauge cables... Is there anything else I am missing such as a resistors or anything I am not aware of to make this swap out? Hoping when all is done I can get closer to 20 mph and hopefully a better controller overall. Any other advice before I make the purchase? Thanks Skip |
|
|
Similar Threads | ||||
Thread | Forum | |||
48v upgrade vs Plum Quick upgrade | Members Rides | |||
18 upgrade? | Big Block Talk! | |||
What to upgrade next...?? | Electric EZGO | |||
G2 to G9 upgrade | Gas Yamaha | |||
Upgrade from 36v to 48v? | Electric EZGO |