lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-17-2018, 05:00 AM   #1
Linck24js
Not Yet Wild
 
Join Date: Mar 2018
Posts: 2
Default 2013 EZGO RXV seat/rear roof bracket

Hi, I have a 13 RXV and have found that the rear roof and seat support brackets that mount to the frame with 3 bolts on each side are missing some bolts due to the nut that is inside the frame from the factory breaking loose. There is no way to replace the nut without having to drill through the opposite side of frame or top of frame and I am worried about weakening the frame by doing that. Will I jeopardize the frame strength by drilling through the frame ? The hole would need to be about 5/8" . Any input or suggestions is appreciated. Thanks
Linck24js is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-17-2018, 08:20 AM   #2
BobBoyce
Gone Insane
E-Z-GO
 
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,412
Default Re: 2013 EZGO RXV seat/rear roof bracket

Quote:
Originally Posted by Linck24js View Post
Hi, I have a 13 RXV and have found that the rear roof and seat support brackets that mount to the frame with 3 bolts on each side are missing some bolts due to the nut that is inside the frame from the factory breaking loose. There is no way to replace the nut without having to drill through the opposite side of frame or top of frame and I am worried about weakening the frame by doing that. Will I jeopardize the frame strength by drilling through the frame ? The hole would need to be about 5/8" . Any input or suggestions is appreciated. Thanks
Look for a Rivet Nut that fits the existing hole that the original nut came out of. As the name implies, they attach into the hole like a rivet. You can search eBay... Try to find one with the original metric thread so that you can use the original bolt. You'll need the right sized rivet nut tool as well to install it. I bought rivet nut sets and rivet nut tools years ago.
BobBoyce is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Custom rear seat & seat lean back bracket ideas needed. Design Center
WTB Yamaha G16 rear seat bracket Golf Carts and Parts
Rear roof support bracket TXT Electric EZGO
Medalist Rear Seat Bracket Electric EZGO
TXT rear seat and roof support bracket Electric EZGO


All times are GMT -5. The time now is 12:57 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.