lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
Thread Tools Display Modes
Unread 10-22-2007, 07:44 PM   #1
blakehenry00
Gone Wild
 
blakehenry00's Avatar
 
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
Default Rocker panels and brush guard...Not a happy camper.

Just ordered a set of each, Not too happy.

This brush guard had to be bent to be able to fit on the front, It also did not come with instructions (None really needed but still)

These panels came with a wadded piece of paper listing parts and two steps:

Remove existing hardware

Install support brackets.

So if anyone has the same panels mind shooting me a pm?
blakehenry00 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 10-22-2007, 08:11 PM   #2
NO NO NO E-Z-GO!
Gone Wild
 
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
Default Re: Rocker panels and brush guard...Not a happy camper.

I can see your mistake...

You ordered from BU!! You actually expected it to WORK??
NO NO NO E-Z-GO! is offline   Reply With Quote
Unread 10-22-2007, 08:24 PM   #3
blakehenry00
Gone Wild
 
blakehenry00's Avatar
 
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
Default Re: Rocker panels and brush guard...Not a happy camper.

Well i mean they look great, But there are no holes in the rocker panels! Pshhh no drilling or cutting required... But you do have to bend and grind it!
blakehenry00 is offline   Reply With Quote
Unread 10-22-2007, 08:29 PM   #4
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 12,954
Default Re: Rocker panels and brush guard...Not a happy camper.

Gee...Considering you bought this from BU, I wonder what would happen if you posted this on BU's forum? I can understand your gripe though.
roady89 is offline   Reply With Quote
Unread 10-22-2007, 08:39 PM   #5
blakehenry00
Gone Wild
 
blakehenry00's Avatar
 
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
Default Re: Rocker panels and brush guard...Not a happy camper.

I did post it over there
blakehenry00 is offline   Reply With Quote
Unread 10-22-2007, 08:43 PM   #6
NO NO NO E-Z-GO!
Gone Wild
 
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
Default Re: Rocker panels and brush guard...Not a happy camper.

I certainly hope you've learned your lesson.

You probably could have gotten the same type of items, except better quality and cheaper, from Cart Parts Plus.

Nevertheless, where are the pictures!?!
NO NO NO E-Z-GO! is offline   Reply With Quote
Unread 10-22-2007, 08:59 PM   #7
blakehenry00
Gone Wild
 
blakehenry00's Avatar
 
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
Default Re: Rocker panels and brush guard...Not a happy camper.

Ill shoot some pictures tomorrow, I looked there, didn't find what I wanted, But really, They will be getting a call from me tomorrow...
blakehenry00 is offline   Reply With Quote
Unread 10-22-2007, 09:07 PM   #8
NO NO NO E-Z-GO!
Gone Wild
 
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
Default Re: Rocker panels and brush guard...Not a happy camper.

They don't list much on their website. I hear they're working on that, though. Give them a call. They are great folks!!!
NO NO NO E-Z-GO! is offline   Reply With Quote
Unread 10-22-2007, 09:26 PM   #9
blakehenry00
Gone Wild
 
blakehenry00's Avatar
 
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
Default Re: Rocker panels and brush guard...Not a happy camper.

I mean they could at least make decent instructions for it, And if I have to cut and drill thats fine, but they should have said that on their site.
blakehenry00 is offline   Reply With Quote
Unread 10-22-2007, 09:48 PM   #10
BigBlockMan
Gone Wild
 
BigBlockMan's Avatar
 
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
Default Re: Rocker panels and brush guard...Not a happy camper.

Shucks NoNo you'll make us blush. Yes we are adding items to the website every week but it takes time, plus all the new motor kits and headers yada yada yada. LOL
BigBlockMan is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Built a brush guard Design Center
Happy Birthday Keith! Announcements
Brush guards Design Center


All times are GMT -5. The time now is 04:03 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.