lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-02-2010, 01:47 PM   #1
SpeedyVol
Not Yet Wild
 
Join Date: Feb 2010
Posts: 64
Default Question about wiring from forward/reverse switch

I am running new 4 gauge wires from my forward/rev. switch to my motor. The wiring diagram that I am looking at is a little light. Can I clarify a few things with somebody that knows?
1997 EZGO TXT non-dcs series cart.

On my forward/rev. switch:
C goes to A2 on the motor
B goes to S2 on the motor
D goes to S1 on the motor
A goes to?????? (not sure about this one)

From the controller, M goes to A1 on motor?
Is M on the controller the only one that goes straight to the motor?
Thanks.
SpeedyVol is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-02-2010, 04:03 PM   #2
LostHusker
??????
 
LostHusker's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: South TX
Posts: 8,615
Default Re: Question about wiring from forward/reverse switch

Quote:
Originally Posted by SpeedyVol View Post
I am running new 4 gauge wires from my forward/rev. switch to my motor. The wiring diagram that I am looking at is a little light. Can I clarify a few things with somebody that knows?
1997 EZGO TXT non-dcs series cart.

On my forward/rev. switch:
C goes to A2 on the motor
B goes to S2 on the motor
D goes to S1 on the motor
A goes to?????? (not sure about this one)

From the controller, M goes to A1 on motor?
Is M on the controller the only one that goes straight to the motor?
Thanks.




On my forward/rev. switch:
C goes to A2 on the motor
B goes to S2 on the motor
D goes to S1 on the motor
A goes toB+ of the controller, you also have another wire from B+ to the solenoid

M on the controller is the only one that goes straight to the motor A1
LostHusker is offline   Reply With Quote
Unread 03-02-2010, 04:06 PM   #3
scottyb
go to cartsunlimited.net
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 69,405
Default Re: Question about wiring from forward/reverse switch

What happened to the series wiring diagram I gave you when you first asked about this? GO back and look at all your threads the diagram is in one of them. You can print it out and take it out to the garage with you
scottyb is offline   Reply With Quote
Unread 03-02-2010, 05:42 PM   #4
SpeedyVol
Not Yet Wild
 
Join Date: Feb 2010
Posts: 64
Default Re: Question about wiring from forward/reverse switch

Thanks so much for your help guys. The dude I purchased the cart from had it wired wrong. Got that corrected. Now I have 4 gauge wire on the whole cart. It makes a difference!
SpeedyVol is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
forward/reverse switch change to toggle switch Electric Club Car
Do I need an HD Forward and Reverse Switch? Electric Club Car
forward/reverse switch wiring Electric Club Car
Wiring 36V Forward Reverse Switch 95CC Electric Club Car
Forward Reverse switch melted on forward...have question about replacement part Electric Club Car


All times are GMT -5. The time now is 12:42 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.