|
07-22-2008, 12:31 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2008
Posts: 3
|
Seat Back Support
Hello, I am new to the forum and a realatively new cart owner.
Does anybody on the forum have a line on custom seat back support brackets for a 2003 Club Car? I am looking to replace the factory steel brackets with something custom for seat back support only and no top. I have seen quite a few custom fabrications from pictures on the forum, but have not been able to find anything for sale. Best Regards, Chris |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-22-2008, 12:42 PM
|
#2 |
|
Gone Wild
 Join Date: Apr 2008
Location: Wichita, KS
Posts: 1,530
|
Re: Seat Back Support
Welcome to BGW!
Are you any good fabricating things? If so you could do it up cheap by modifying what you have. Good luck! |
|
|
|
|
07-22-2008, 01:11 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2008
Posts: 3
|
Re: Seat Back Support
Thanks. I am looking to dress it up a bit. I have new body, chrome wheels, chrome rockers, carbon wheel, etc. Thinking about a mechanical solution using anodized aluminum tubing and slip on railing couplers.
 I am not a welder and these couplers are quite expensive so I might be better off having something fabricated. Not to save money but definately time and probably a cleaner look. |
|
|
|
|
07-22-2008, 05:17 PM
|
#4 |
|
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: Seat Back Support
Welcome to the forum chalfman........................
|
|
|
|
|
07-22-2008, 07:13 PM
|
#5 |
|
Not Yet Wild
Join Date: Jul 2008
Posts: 3
|
Re: Seat Back Support
Thanks.
|
|
|
|
|
07-22-2008, 07:37 PM
|
#6 |
|
Getting Wild
Join Date: Jul 2008
Location: odessa.fl
Posts: 99
|
Re: Seat Back Support
yep take a 1" Sq tube come up about 6" from bottom and cut a v out of them on the front side and bend them in to fit what feels good to your sitting habits. then have them welded drill holes in bottom for bolts and at top for back rest you can use alum and shine them up these are what comes with diamond plate beds for golf carts
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Back end | Electric Club Car | |||
| Cart Seat and back | Golf Carts and Parts | |||
| 96 c.c. top support | Golf Carts and Parts | |||
| back seat and top | Golf Carts and Parts | |||
Linear Mode
