lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Post New Thread  Reply
Thread Tools Display Modes
Unread 03-09-2007, 05:52 PM   #1
T-Bag
Not Yet Wild
 
Join Date: Mar 2007
Posts: 2
Default Need Help with Melex

I have a Melex three wheel cart that I have been working on. I have 6 new battiers and all new wires, expect for the one to the speed control. I also have a new solenoid I installed.

Starts off running fine but after a short period of time. It slows down like the battiers are dead. What could be the problem??

Thanks
T-Bag is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-09-2007, 05:55 PM   #2
roady89
Guest
 
Posts: n/a
Default Re: Need Help with Melex

Quote:
Originally Posted by T-Bag
I have a Melex three wheel cart that I have been working on. I have 6 new battiers and all new wires, expect for the one to the speed control. I also have a new solenoid I installed.

Starts off running fine but after a short period of time. It slows down like the battiers are dead. What could be the problem??

Thanks
First thing to do is check ALL of your connections. Make sure they are clean and tight. You more than likely have a cable that is loose. If you have one loose it will cause overheating and could cause it to not make good contact.
  Reply With Quote
Unread 03-09-2007, 06:04 PM   #3
T-Bag
Not Yet Wild
 
Join Date: Mar 2007
Posts: 2
Default

I'm gonna go back and check but I'm almost sure that they are tight and I've cleaned them also. Maybe I missed one.

If it's not that then what should I check next?

Thanks
T-Bag is offline   Reply With Quote
Unread 03-09-2007, 06:09 PM   #4
roady89
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by T-Bag
I'm gonna go back and check but I'm almost sure that they are tight and I've cleaned them also. Maybe I missed one.

If it's not that then what should I check next?

Thanks
Check the contacts on the wiper board and see if there is any arcing. this can cause problems. Next would be a bad battery....Its not out of the norm for battery cables to get sorta loose in a month with normal driving. If the batteries are new and you have run it a little while you need to check the cables..
  Reply With Quote
Unread 06-15-2007, 10:24 AM   #5
spriddle
Admin
 
spriddle's Avatar
Yamaha
 
Join Date: Dec 2006
Location: TN
Posts: 26,172
Default Re: Need Help with Melex

bump
spriddle is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Thread Tools
Display Modes



All times are GMT -5. The time now is 11:54 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.