lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!
Big Block Talk! Everything about swapping a big block engine into your cart!

Post New Thread  Reply
Thread Tools Display Modes
Unread 12-01-2012, 10:56 PM   #1
Getting Wild
Join Date: Apr 2012
Location: Northern Michigan(LP)
Posts: 80
Default 420CC clone throttle linkage

Does anyone have pics of the stock throttle set up for the 420 predator? This shouldn't be very challenging, but i just cant see it. I could also use some tips on the wiring cross over from the 420 to the stock G9 generator and wiring harness. Id like to use the original switch from the cart. Any help is appreciated.
MI,REDNECK is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Unread 12-02-2012, 11:12 AM   #2
Vegas modded 420
sho305's Avatar
Join Date: Jun 2009
Location: West MI
Posts: 14,955
Default Re: 420CC clone throttle linkage

Its all in my threads how I did it, but you can do it however lol.
I made a linkage to hook the stock cable to and used the clone rod to carb. I removed the governor entirely but did use part of that arm as you can see in the photos of it.

Others have done it differently and just hooked the cable up or made a different lever, just search some for the threads you will find. I was in a welding shop so easy for me to make that stuff up as I did on the first clone I put in. That thread is referenced in there somewhere its in the yamaha gas section.

There is not much to the wiring I left all the cart wiring just unplug the coil/ignitor/pickup. I tapped the white/red wire to the coil to power a relay that is normally closed and opens when powered. Hook that to the kill switch on the clone, or in place of it, all it does is ground the ignition wire to the block unless you power up the cart/pedal. The white/red wire is the power from key to pedal to ignition when stock. So that kills it unless the pedal is 'on' if you use stock starting. Or you could bypass the pedal switch (or hook in after the key by the engine) it would kill via the key only and you would need to start it with something else.
sho305 is offline   Reply With Quote
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!

Thread Tools
Display Modes

Similar Threads
Thread Forum
Harbor Freight not selling 420cc clone? Clone Engine Swaps
Throttle hooked to governor linkage on clone Clone Engine Swaps
Throttle linkage Gas EZGO
Clone throttle linkage help! Clone Engine Swaps
88CC 16hp clone build throttle linkage problem Gas Club Car

All times are GMT -5. The time now is 08:47 PM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of 2006-2017 All rights reserved.