lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.

Post New Thread  Reply
Thread Tools Display Modes
Unread 01-22-2013, 07:33 AM   #1
Not Yet Wild
Join Date: Jan 2013
Posts: 23
Default Bore Size

I am having some difficulty finding out the stock bore size of a 2002 EH35C engine. About 5 years ago, I replaced the pistons and rings, and now the engine has low compression (90# per cylinder) and it smokes. I don't want to buy blind and get 0.25mm oversize pistons if the block is worn past that point. I disassembled the engine last night, and there is no ridge to speak of on top of the cylinder. However, there is a lot more "slop" than I think is necessary when I insert the piston inside the existing hole.

What is the bore size of the 350 cc Robins engine? Are 0.50mm oversize pistons available?

Thanks in advance for your help.
drs1023 is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Unread 01-22-2013, 05:48 PM   #2
Gone Wild
rvkersh's Avatar
Join Date: Apr 2012
Location: Dansville, NY
Posts: 395
Default Re: Bore Size

2.6378-2.6385" is standard bore for the 350, piston oversizes are.25 and .50mm.
rvkersh is offline   Reply With Quote

350cc, cylinder, piston, rebuild
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO

Thread Tools
Display Modes

Similar Threads
Thread Forum
bore size for g22 Gas Yamaha
bore out on G16 Gas Yamaha
What is the original bore size of a FZ340? Gas Club Car
G1 bore Gas Yamaha
Flat head bore size? Gas Club Car

All times are GMT -5. The time now is 03:25 AM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of 2006-2017 All rights reserved.