lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts.



Post New Thread  Reply
Thread Tools Display Modes
Unread 05-19-2013, 02:13 AM   #1
zamahuikano
Not Yet Wild
 
zamahuikano's Avatar
 
Join Date: Feb 2013
Location: Spain
Posts: 7
Lightbulb install throttle hall curtis controller

I want to change the throttle potentiometer 5k resistive Hall Effect other on my Curtis 1236. I tried in the configuration types 2-3 and 4 and the controller does not recognize and indicates an alarm.
Anyone know a way to adapt the accelerator hall and does not indicate the controller alarm. I think the controller to detect no load "5k" potentiometer itself goes into alarm. Any ideas ....
zamahuikano is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 05-20-2013, 08:34 PM   #2
zamahuikano
Not Yet Wild
 
zamahuikano's Avatar
 
Join Date: Feb 2013
Location: Spain
Posts: 7
Thumbs up Re: install throttle hall curtis controller

problem solved:
Finally I was able to connect the accelerator hall and works perfect. This will supply voltage with +5 v (pin 26) and gnd (pin7) and the output signal (pin 16).

I've set the type 2 for 0-5V voltage source and then calibrate it with:
Forward Deadband, Forward Map, Forward Max y Forward Offset
I had the accelerator hall well connected but I was alarm the problem was that was turned on to "1" the protection HPD / SRO, disconnect and set to 0:

HPD / SRO Type 0-3 Determines the type of HPD / SRO protection. One type of checks is available for materials-handling vehicles, and two types for golf-style vehicles.
If any of the HPD / SRO checks finds an input sequencing problem, and HPD / Sequencing Fault (flash code 47) is set.
zamahuikano is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts


Thread Tools
Display Modes


Similar Threads
Thread Forum
Throttle fault on the Curtis Controller 1268 Electric golf carts
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller Golf Carts and Parts
throttle problem,new controller,throttle works backwards Electric EZGO
Need help with Curtis 1214 controller/throttle?? Electric golf carts


All times are GMT -5. The time now is 11:38 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.