|
|
|||||||
| Side x Sides/ATVs/Quads/Bikes/Jeeps/4x4's! Side x Sides, ATVs, Quads, Bikes, Jeeps, 4x4, and everything else. |
  |
|
|
Thread Tools | Display Modes |
10-17-2018, 08:24 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2008
Location: New Jersey
Posts: 39
|
Vintage side by side build
I picked up a ratty old three wheeled side by side a little while ago and finally got a chance to mess with it. Lifted the rear end 12" leaving the original leafaprings in their original position. Load is rated at 1500lbs on this thing. 4 linked the front and converted to 4 wheels. I also installed a 670cc engine to run the hydraulic pump. It is hydrostatic drive. I am trying to get it finished so I can take the kids trick or treating with it on Halloween. I will post more pics as the project goes on. Hope the pics work.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 150cc chinese side by side reverse gear fliud? | Side x Sides/ATVs/Quads/Bikes/Jeeps/4x4's! | |||
| Passenger side sits lower than driver side | Electric Club Car | |||
| Side to side main support - pipe or solid? | Electric Club Car | |||
| 06 CC Precedent moves side to side at full throttle. | Gas Club Car | |||
| Passanger side Brake grabbing more than Driver side | Electric Club Car | |||
Linear Mode
