|03-06-2011, 10:34 PM||#1|
Not Yet Wild
Join Date: Mar 2011
Location: Lacoochee, Fl
CheTech Utility Vehicle clutch issues...
I recently purchased a dump bed utility two seat vehicle, the name on it is CheTech ( built in wisconsin), from a guy here in Florida. It was purchase with a known bad engine and upon inspection also found a cracked drive clutch. I have found a replacement engine for it, a kohler 18hp command , and I believe that it will prove to be a good replacement for the tired 16hp vanguard that is in it now. Here is the problem....the kohler has a 1 1/8 inch output shaft that is 4 inches long, comet clutches are out of business, does anyone have any ideas on what to use for a clutch on this thing. Money wise I am into this very good ( 350.00 for the chetech and 400.00 for the kohler with only 17.4 hrs on it ) I just hope that I don't have to spend more than what I have put out so far for the clutch. PLEASE HELP....
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
|03-07-2011, 02:11 AM||#2|
Join Date: Nov 2008
Location: Central Texas
Re: CheTech Utility Vehicle clutch issues...
CPP has the only one's I know of. Very nice clutch, would be perfect for the Kohler:
|Thread Tools||Search this Thread|
|G16 belt and clutch issues||Gas Yamaha|
|clutch issues||Gas Yamaha|
|Belt/Clutch Issues||Big Block Talk!|
|G16 1997 issues with rough start - Clutch or ???||Gas Yamaha|
|Help identify this Ez-Go Utility vehicle||Gas EZGO|