lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Rules and Testing > Test Post
Test Post Test your Sig, Avatar, or images here.



Post New Thread  Reply
Thread Tools Display Modes
Unread 03-27-2016, 10:14 PM   #1021
.......BGW........
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 15,209
Default Re: Help identify this , Not sure what brand or model...

rib33024 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 03-29-2016, 09:16 AM   #1022
.......BGW........
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 15,209
Default Re: need help identifying the right part number

Two places. in the glove box on the passenger side of the cart. Or lift the seat, and the black plastic panel over the rear batteries, lift it up, and on the frame above the rear batteries, there will be a sticker on the cross frame. And there is a sticker under the charge port on the cart









rib33024 is offline   Reply With Quote
Unread 04-07-2016, 06:37 AM   #1023
.......BGW........
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 15,209
Default Re: wiring diagrams

,,,
rib33024 is offline   Reply With Quote
Unread 04-13-2016, 02:40 PM   #1024
Getting Wild
 
Join Date: Mar 2016
Posts: 129
Default Re: Anybody seen a Club Car Front end like this ?

Duh, probably a good idea to actually attach the pictures ?


Anybody seen a Club Car Front end like this ?
Attached Images
File Type: jpg photo 2.jpg (213.7 KB, 0 views)
File Type: jpg photo 1(2).jpg (201.5 KB, 0 views)
File Type: jpg photo 1.jpg (197.9 KB, 0 views)
mrmotoguzzi00 is offline   Reply With Quote
Unread 04-13-2016, 08:15 PM   #1025
G8 Specialist
Yamaha
 
Join Date: Jun 2009
Location: Phoenix
Posts: 7,769
Default Re: DIY Motor Tensioner

Ray, if I ever make another one, I'd do a grade 8. I broke a 1/4" (the first one I made), so after that, I made 2, (both 5/16" grade 5), thinking that should be it. If I'm making one, I might as well make 2, and have an extra!! Well about 4 yrs later, I found the threads being stripped off the bolt. So,,,I double nutted the second one hoping that does it!! We will see!!

These little suckers, being hot roded, use up parts!!
Attached Images
File Type: jpg image.jpg (151.2 KB, 0 views)
Mike Mac is offline   Reply With Quote
Unread 04-29-2016, 08:54 AM   #1026
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 15,584
Default Re: 2010 EZGO PDS tire size

Quote:
Originally Posted by surferd15 View Post
Im looking at two different 12 inch wheels and tire combos. I like the look of the 215/40/12s. Would this affect anything like steering or rubbing on the inside? Other set is 205/30/12. I ride mostly on street and some grass/dirt. I read the highest I can go is 18.5 inches with stock height? I measured and it seems like I have more room. Need a little help here. Thank you.
As long as you don't go to a tire width (sidewall to sidewall is tire width) much greater than stock (8.5"), you can go to about 20" in tire height without rubbing.

If you go taller the stock tire height (18") you will increase the cart's top speed, but lose torque. IE: Mathematically, a 20" tall tire produces about an 11% increase in speed at the expense of a 10% reduction in torque.

A 215/40/12 tire is about 18.8" tall and 8.5" wide (4.4% speed gain - 4.3% torque loss)

A 205/30/12 tire is about 16.8" tall and 8.0" wide (6.7% speed LOSS - 7.1% torque GAIN)
JohnnieB is offline   Reply With Quote
Unread 05-01-2016, 08:47 AM   #1027
Gone Wild
Tomberlin
 
Join Date: May 2012
Location: fl
Posts: 200
Default Re: Considering a 1,000cc Goldwing into a Yamaha G2

1200 goldwing bored and stroked in a golf cart, suppose to do 11.5 1/4 mile @ 110 mph. It looks like it is a g2 frame highly modified, 5 speed high and 5 speed low, and electric reverse.
Attached Images
File Type: jpg DSC_0161.jpg (261.8 KB, 0 views)
File Type: jpg DSC_0163.jpg (86.7 KB, 0 views)
File Type: jpg DSC_0164.jpg (110.5 KB, 0 views)
File Type: jpg DSC_0169.jpg (92.1 KB, 0 views)
File Type: jpg DSC_0167.jpg (78.8 KB, 0 views)
kawasaki is offline   Reply With Quote
Unread 05-01-2016, 10:26 AM   #1028
.......BGW........
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 15,209
Default Re: First cart, used, I'm broke, what to do first?

Yamaha G9(?) Rear end input shaft splines. What sprocket will work?


Yamaha G9(?) Rear end input shaft splines. What sprocket will work?

sprocket

http://www.denniskirk.com/jsp/produc...d=0872911&mmy=

http://www.denniskirk.com/jsp/produc...eafCatId=11208


chain drive input shaft sprocket assy


Found a sprocket

motor bike engine build differential
rib33024 is offline   Reply With Quote
Unread 05-06-2016, 05:10 PM   #1029
.......BGW........
 
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 15,209
Default Re: How do I post to sell a golf cart?

,,,
rib33024 is offline   Reply With Quote
Unread 05-11-2016, 09:11 AM   #1030
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 15,584
Default Re: Installed high speed magnet now hitting 23mph

Per a PM request - Here are the TXT 48V Parts and service manuals.
Attached Files
File Type: pdf 48 TXT Parts Manual.pdf (8.02 MB, 0 views)
File Type: pdf 48V TXT Service Manual.pdf (4.28 MB, 0 views)
JohnnieB is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Rules and Testing > Test Post


Thread Tools
Display Modes



All times are GMT -5. The time now is 03:58 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.