Curtis 400 amp controller ---lug wire
1 Attachment(s)
2003 CC DS---can anyone tell me where the lug wire connects (see arrow)
|
Re: Curtis 400 amp controller ---lug wire
Does that plug into the factory harness or the new controller? Which pin?
|
Re: Curtis 400 amp controller ---lug wire
Looks like a black wire, and it's short enough I would assume it goes to the B- terminal on the controller, but you know what they say about assuming...
Like KGSC said, which pin is the wire on in the harness, and which end does that connector plug into? |
Re: Curtis 400 amp controller ---lug wire
everything is plugs into the old harness, except this lug wire with black and white wires
|
Re: Curtis 400 amp controller ---lug wire
Right. We just need to know what pin that wire is connected to so we can figure out what it is for.
|
All times are GMT -5. The time now is 03:45 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.