Buggies Gone Wild Golf Cart Forum
Page 1 of 5 1 23 > Last »
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   What is this? MS? Volt Reducer? (https://www.buggiesgonewild.com/showthread.php?t=84625)

branman1971 08-23-2013 04:39 PM
What is this? MS? Volt Reducer?
 
1 Attachment(s)
1982 EXGO. I traced the power from the battery to this module, which is mounted on the assembly that holds the solenoid and I cannot get current to go through it nor an ohms check.

yurtle 08-23-2013 05:56 PM
Re: What is this? MS? Volt Reducer?
 
Looks like some kind of buzzer or vibrator.

branman1971 08-23-2013 06:03 PM
Re: What is this? MS? Volt Reducer?
 
That never occurred to me, but makes sense since it has a flapper on it. So I would guess it's not involved in the reason I cannot get this thing to run?

simple man 08-23-2013 06:17 PM
Re: What is this? MS? Volt Reducer?
 
I think that is a reverse beeper. Check the stickys at the top of the electric ezgo page, there are the wiring diagrams posted there! :mrgreen:

branman1971 08-24-2013 06:34 PM
Re: What is this? MS? Volt Reducer?
 
1 Attachment(s)
So I have been staring at diagrams for 2 days. I believe the one of my setup is the one i attached. My wiring in the cart is somewhat different and I think I wanna take everything apart and re-wire it like the diagram shows. What yall think? Bad idea?

Sir Nuke 08-24-2013 06:47 PM
Re: What is this? MS? Volt Reducer?
 
seeing as how you have a resistor cart......my suggestion would be to do a "Resistor to Solid State Conversion"

branman1971 08-24-2013 07:52 PM
Re: What is this? MS? Volt Reducer?
 
I saw that conversion. Looks like it requires $. I just wanna see if I can get this thing to move.

93yellowclubcar 08-24-2013 10:14 PM
Re: What is this? MS? Volt Reducer?
 
1 Attachment(s)
Quote:
Originally Posted by branman1971 (Post 923242)
I saw that conversion. Looks like it requires $. I just wanna see if I can get this thing to move.
The conversion does cost money, and on a 3 wheel cart that is that old, it's really not worth it. Besides, once you have it running it's a near bulletproof system. See if this diagram matches what you've got any better, I think it may. It's the one I was referring to in your other thread, I just didn't know there were like 3 diagram stickies up there.

Attachment 90036

Hope this helps you out!

branman1971 08-25-2013 05:12 PM
Re: What is this? MS? Volt Reducer?
 
1 Attachment(s)
That diagram matches very closely, but my setup has 2 microswitches on the F/R assembly, so I went with this one attached.

93yellowclubcar 08-25-2013 07:27 PM
Re: What is this? MS? Volt Reducer?
 
Hmmm... I say go with making it look like the diagram you found and see what happens. Just make sure to take note and take pics of where stuff is at before you start. :thumbup:


All times are GMT -5. The time now is 11:38 PM.
Page 1 of 5 1 23 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.