Swapping engines/G2/G9/G8/G14
I have seen alot of posts latley asking about using different engines in different carts. Here is my advice. All G2/G9/G8 long blocks are enterchangable. The G14 long block is also, it just has a larger bore, there for different piston/rings/head gasket. Now hope this works...the G2 uses J38 pulsar coil/ROTOR/Ignitor/wire harness and coil. G9 uses J38 pulsar coil/Rotor/JG5 ignitor/JG5 wire harness and j38 coil. the G8 uses JF2 pulsar coil/JF2 ROTOR/Jf2 ignitor/JF2 wire harness and a JF2 coil. G14 uses a JF2 pulsar coil/JF2 Rotor/JN3 ignitor/JN3 wire harness and a JF2 coil. My point is..If your using a long block from a G14 into a G2, You would need to install the J38 pulsar coil/ Rotor and coil from the G2 engine with this done, you would use the G2 wire harness and ignitor and your motor should run. Please remember the pulsar coil/Rotor/coil/wireharness and ignitor must match for ignition system to work. Hope this makes sence and helps. Good luck. Later Dave:thumbup:
|
Re: Swapping engines/G2/G9/G8/G14
If a Knowledgable cart guy cant understand it..I missed the mark. So will try again. You can not use a chevy distibutor in a ford. You can't use ignition parts from one Yamaha to another if they do not work together/match. Capice?/Comprendo?/Understando? :lhmo: I was really trying to help.
|
Re: Swapping engines/G2/G9/G8/G14
thanks for posting this smallblock thats great info. i think this needs a sticky
|
Re: Swapping engines/G2/G9/G8/G14
Quote:
|
Re: Swapping engines/G2/G9/G8/G14
Dave, that really is good info, great for a sticky. Think about it, as good used G2/G8/G9 motors get harder and harder to find, more people are going to want to use the newer model engines and will need to know how to set them up! I Vote Sticky!
|
Re: Swapping engines/G2/G9/G8/G14
Sticky! Great info!! Thanks Dave. :mrgreen:
|
Re: Swapping engines/G2/G9/G8/G14
Quote:
|
Re: Swapping engines/G2/G9/G8/G14
Oh hell, I vote Stickie Too :thumbup: I was jus givin Dave a ribbin'. Sorry I didn't get back sooner to let him know :oops:
Dave's post is well thought out. It is input like this that makes BGW so invaluable to everyone who drives a golf cart ...... Dave is among the fine group of highly knowledgable techs who freely contribute and make this site what it is. |
Re: Swapping engines/G2/G9/G8/G14
Wasn't ment to be a sticky...It only pertained to a few people changing engines. Scotty, I never took it the wrong way, I thought your "WHAT" was funny:lol: To all the others with the nice words, thanks. I think my head is swelling:lhmo: Do they have a smilie for a guy with a swollen head? Anyway hope it helps someone in the future. Later Reverand Smallblock, now how about 2 hail mary's:lhmo::lhmo:
|
Re: Swapping engines/G2/G9/G8/G14
1 Attachment(s)
:wink:8)no ....... but I got these today at a yard sale :thumbup:
|
All times are GMT -5. The time now is 10:44 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.