Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric Club Car (https://www.buggiesgonewild.com/forumdisplay.php?f=13)
-   -   Huba Huba (https://www.buggiesgonewild.com/showthread.php?t=168181)

harp_wailer@yahoo.com 08-24-2020 09:48 AM

Huba Huba
 
Hello Guy's and Gal's

I bought a SGC 6 inch lift kit for my 1984 DS Club Car and the hub will not fit the spindle leaving enough space to tighten the castle nut far enough down to put the cotter pin in. The kit that I bought is for a 1984. Help!:help:

Fairtax4me 08-24-2020 06:58 PM

Re: Huba Huba
 
Does the castle nut actually thread on properly?
There were two different spindles used on Club Car and the later ones are shorter, but the threads are also smaller diameter.
If the castle nut will thread on, make sure there is no paint or rough marks on the spindle. Make sure the bearings will slide on all the way onto the spindle.


All times are GMT -5. The time now is 12:07 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.