36v only goes in reverse
I upgraded my stock motor to a Plumquick motor, put motor on and now cart will only go in reverse? Cart ran slow forward at first and now nothing forward!!
|
Re: 36v only goes in reverse
|
Re: 36v only goes in reverse
Sorry 94 ezgo medalist 36V
|
Re: 36v only goes in reverse
If the solenoid clicks in both F & R, the problem is in the high current contacts inside the F/R switch assembly.
|
Re: 36v only goes in reverse
Ok solenoid is clicking in both f and r, but it goes backwards in F, and nothing in R?? Is my FNR assembly bad?
|
Re: 36v only goes in reverse
Quote:
Post a pic of the battery side of the F&R switch please. Ezgo released a few early DCS carts & you may have one |
Re: 36v only goes in reverse
Ok I switched the wires on motor now it will go forward and not in reverse, I think I might have tightened the bolts on on of the studs too tight, and spun the stud and broke it, could this be the problem?!
|
Re: 36v only goes in reverse
No. Not to say you didn't. but if the motor works fine in one direction, it should work fine in the other, so I wouldn't waste my time on that.
|
Re: 36v only goes in reverse
Quote:
You never answered my question or posted a pic of the F&R? |
Re: 36v only goes in reverse
Sorry just got home here it is, well I don't know how to post a pic
|
All times are GMT -5. The time now is 07:29 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.