Changing Perf Option on an 03 PDS
Hey guys, new guy here with a question.
I have an 03 EZ-GO with a PDS controller. It is currently totally stock and set up from the factory with Performance Option 2 (Steep Hill). I just want to change it to the Perf Option 4 (Freedom), to dial back the compression braking and get the speed up from 13 MPH to 18 MPH or so. My question is: can I just rewire the J-2 (option) plug from the Option 2 configuration to the Option 4 configuration, or do I have to buy the Red Option 4 plug and swap it out? Thanks for sharing your know-how, you guys have a wealth of information. Clueless |
Re: Changing Perf Option on an 03 PDS
I know that you can do it - but if it were me - I would spend the $10 and buy the plug.
|
Re: Changing Perf Option on an 03 PDS
Quote:
|
Re: Changing Perf Option on an 03 PDS
Thanks, Blue Chip. That was my next question (price). If that's all they cost, I'll buy one.
Not as clueless as I was before. |
Re: Changing Perf Option on an 03 PDS
Taking the cover off of the controller is the hardest part of the deal. Make sure you have a 4" socket extension.
The whole deal should take you all of 4 minutes. If you stop to drink a beer in the process. |
Re: Changing Perf Option on an 03 PDS
Quote:
|
Re: Changing Perf Option on an 03 PDS
|
Re: Changing Perf Option on an 03 PDS
Quote:
|
All times are GMT -5. The time now is 12:19 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.