Buggies Gone Wild Golf Cart Forum
Page 21 of 1782 « First < 111920 21 222331711215211021 > Last »
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas Yamaha (https://www.buggiesgonewild.com/forumdisplay.php?f=17)
-   -   Yamaha G8 Club - Please post! (https://www.buggiesgonewild.com/showthread.php?t=49288)

CajunLoneWolf 06-23-2011 01:37 PM
Re: Yamaha G8 Club - Please post!
 
Quote:
Originally Posted by stuff4mason (Post 582865)
Cajun, don't you worry my man. Between us G8 club members, we'll get that thing running in no time. If not, well, then we will chat some more about garages!!!!!!!!!!!!
lol either way we are all good :P

smallblock450sl 06-23-2011 05:35 PM
Re: Yamaha G8 Club - Please post!
 
Quote:
Originally Posted by Mike Mac (Post 582690)
Cajun, where is the valve cover port, for the PCV valve (passenger side valve cover)? You may have the incorrect valve cover. Wonder if you need that for the pulse for the fuel pump?

You also need the boot around the spark plug wire end.
I'll try to throw some info in here... The valve cover "port" on the passanger side is for a "check valve hose" and it was used on G2 thru G8's for the oiling system. The oiling tube (at the back of the cylinder) would use the "step ladder" method. Oil would come up the tube and the check valve (one way) would hold the oil in place till the next engine compression cycle. In 1995 G14's Yamaha stopped the check valve system. Maybe he has a G14 valve cover? I like both engine detailing builds, shows extreme attention to detail from 2 nerotic members:mrgreen::lhmo:

CajunLoneWolf 06-23-2011 06:16 PM
Re: Yamaha G8 Club - Please post!
 
Quote:
Originally Posted by smallblock450sl (Post 583006)
I'll try to throw some info in here... The valve cover "port" on the passanger side is for a "check valve hose" and it was used on G2 thru G8's for the oiling system. The oiling tube (at the back of the cylinder) would use the "step ladder" method. Oil would come up the tube and the check valve (one way) would hold the oil in place till the next engine compression cycle. In 1995 G14's Yamaha stopped the check valve system. Maybe he has a G14 valve cover? I like both engine detailing builds, shows extreme attention to detail from 2 nerotic members:mrgreen::lhmo:
OK sooooo do I need to get another valve cover or am I good :oops: Cause I am totally lost :?

justin146 06-23-2011 06:21 PM
Re: Yamaha G8 Club - Please post!
 
So I rode the cart to the store today to put gas in it. When I lifted the seat I noticed smoke coming from inside the cooling shroud. What could cause this? Also, the head was hot enough to boil spit. And that is after driving about half a mile at 20-22mph. It was low on oil. I put more in her, but havent driven it anymore.

Also, how much air should be blowing out of the head breather? I dont have mine tied to the airbox, it just vents. I get a solid puff or air (smoke) with every stroke.

CajunLoneWolf 06-23-2011 06:41 PM
Re: Yamaha G8 Club - Please post!
 
:cussing:OK just went on yamahas website and pulled up the parts catalog for my cart. I have the right valve cover on mine. Even the part number is the same....... Soooooo now I'm even more confused. Maybe it is a replacement cover that replaced a discontinued one???? Oh well if it works it works I guess. The spark plug wont get here fast enough....... :cussing:

justin146 06-23-2011 07:36 PM
Re: Yamaha G8 Club - Please post!
 
Here are the pictures of my Pro-Comp 9131 HID conversion. When I bought these I thought there may be enough room in them to hide the ballast, and I was right. It fits in there perfectly.

These lights dont use the standard H3 mounting method, so I had to use zip ties on them.

http://i150.photobucket.com/albums/s...01684Large.jpg

The ballast pigtails wired right in. I didnt have to splice anything.

http://i150.photobucket.com/albums/s...01687Large.jpg

The ballast as it fits in the light housings:

http://i150.photobucket.com/albums/s...01686Large.jpg

All wired up:

http://i150.photobucket.com/albums/s...01690Large.jpg

The light bar in "garage door clearance mode":

http://i150.photobucket.com/albums/s...01694Large.jpg

And some beauty shots:

http://i150.photobucket.com/albums/s...01698Large.jpg
http://i150.photobucket.com/albums/s...01699Large.jpg
http://i150.photobucket.com/albums/s...01700Large.jpg

stuff4mason 06-23-2011 08:09 PM
Re: Yamaha G8 Club - Please post!
 
Quote:
Originally Posted by justin146 (Post 583040)
So I rode the cart to the store today to put gas in it. When I lifted the seat I noticed smoke coming from inside the cooling shroud. What could cause this? Also, the head was hot enough to boil spit. And that is after driving about half a mile at 20-22mph. It was low on oil. I put more in her, but havent driven it anymore.

Also, how much air should be blowing out of the head breather? I dont have mine tied to the airbox, it just vents. I get a solid puff or air (smoke) with every stroke.
Is there something stuck in the fan? One thing someone prior to me did, was he cut out the side of the fan opening, so I guess it gets more air. Only thing I can think of. But, the engines NEVER got hot. Maybe check to see if something is wedged in there?

Also, remember when you put oil into it now, only use 1 quart of oil per change. You can't count on the dipstick now, cause of the lift. It'll be off quite a bit. Otherwise you'll get oil back into the air box.

stuff4mason 06-23-2011 08:13 PM
Re: Yamaha G8 Club - Please post!
 
Boys, I'm heading to the lake! May not get on BGW very often....heck, if I have my way, I won't even open the laptop! I get 12 days of AHHHHHHHH.....sitt'n at the lake! or the pppssshhh of a beer opening! We are going after striper at 3-4AM at least twice! Wish me luck!!

CajunLoneWolf 06-23-2011 08:17 PM
Re: Yamaha G8 Club - Please post!
 
Quote:
Originally Posted by stuff4mason (Post 583098)
Boys, I'm heading to the lake! May not get on BGW very often....heck, if I have my way, I won't even open the laptop! I get 12 days of AHHHHHHHH.....sitt'n at the lake! or the pppssshhh of a beer opening! We are going after striper at 3-4AM at least twice! Wish me luck!!
Good luck bro enjoy yourself and wet a line for me:thumbup:

justin146 06-23-2011 09:21 PM
Re: Yamaha G8 Club - Please post!
 
Quote:
Originally Posted by stuff4mason (Post 583098)
Boys, I'm heading to the lake! May not get on BGW very often....heck, if I have my way, I won't even open the laptop! I get 12 days of AHHHHHHHH.....sitt'n at the lake! or the pppssshhh of a beer opening! We are going after striper at 3-4AM at least twice! Wish me luck!!
You should do what I did, move to the lake :) My lake is 98,520 acres.


All times are GMT -5. The time now is 11:51 PM.
Page 21 of 1782 « First < 111920 21 222331711215211021 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.