cart stopped working
my 1997 EZ-GO cart stopped going ? I can hear the motor spinning, both axels and hubs are good. ? any Ideas what to do next.
|
Re: cart stopped working
Quote:
Do you mean to say you can hear the motor spin in Forward and Reverse but the cart does not move? If so, the common cause is a stripped hub. Remove hub cap and dust over ... check to see if the axle spins and wheel does not. Driver side is most common. But either side may fail. |
Re: cart stopped working
Did that when jacked up on one side the raised wheel turns and I can not stop it . Same with the other side.
|
Re: cart stopped working
But with the cart on the ground it does not move? Likely, one of the hubs is stripped on the axle splines.
|
Re: cart stopped working
If the hubs arn't stripped than the electric motor connection to the rear diff. I have seen a few do that, but more common is the hubs.
|
Re: cart stopped working
Quote:
|
All times are GMT -5. The time now is 05:00 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.