Club Car Precedent MCOR throttle cut out
 

I have a 2016 Precedent and the throttle goes to 100% and then cuts out as you keep pressing it. I have a Alltrax controller and a PlumQuick motor installed. I replaced the MCOR with a new one and it does the exact same thing. Any ideas?

This model precedent have a integrated MCOR/Peddle assembly does anyone know if there is a stop adjustment on these?

Thanks
Bill

Re: Club Car Precedent MCOR throttle cut out
 

Do the auto-cal adjustment in the software.

Re: Club Car Precedent MCOR throttle cut out
 

No stop per se for that, but if the throttle is dropping out as you are watching it on the Alltrax Monitor Screen, then you need to test the MCOR signal at the controller and see if it is an issue coming from the potentiometer or an issue inside the controller.