Reverse frequently fails.
I have an electric EZGO with the F&R switch behind the operator's legs.
Frequently reverse will not work but giving the F&R switch a shot of WD40 will fix it for a day or two.
Jim |
Re: Reverse frequently fails.
I would replace the contacts in the FNR switch, they are about $3 apiece.
|
Re: Reverse frequently fails.
It all depends if the board has been damaged. Rebuilt eventually fry again.
|
Re: Reverse frequently fails.
Good point Mike. :thumbup:
|
Re: Reverse frequently fails.
Quote:
|
Re: Reverse frequently fails.
It's the board that your FNR contacts are located on, like this:
http://www.buggiesunlimited.com/imag...s/P0001990.jpg These are the contacts: http://www.buggiesunlimited.com/imag...s/P0002449.jpg |
Re: Reverse frequently fails.
I would put a new F&R in it and be good to go for a long while :thumbup:
|
Re: Reverse frequently fails.
Quote:
|
Re: Reverse frequently fails.
What year is your cart just because the the lever is between your legs doesn't mean it is a series cart and that it has contacts. It could also be a DCS cart which was made from 94-99 I believe and it just has microswitches on the lever between your legs.
|
Re: Reverse frequently fails.
He is spraying the F&R with WD40 and getting results . ......... it doesn't sound like anything but a series F&R ?????
|
All times are GMT -5. The time now is 05:50 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.