Pinion disassembly, frame mount PDS
1 Attachment(s)
Ok, I'm going through the steering on my frame mount 2000 PDS. Center of the rack chewed pretty good. New rack/pinion kit in route.
But I'm at a loss on the pinion. I can't get it out. It acts like there's a snap ring or something in there, but I can't see anything with all the grease... (Really need a parts washer) Before I get on this with a pulling contraption, I wanted to ask for some advice on how to get it out. Anyone? Thanks!!! |
Re: Pinion disassembly, frame mount PDS
1 Attachment(s)
Sorry for multiple posts. I can't seem to attach more than one pic to a post. I also don't know why they randomly orient themselves... :roll:
|
Re: Pinion disassembly, frame mount PDS
1 Attachment(s)
This would explain the popping, slipping steering wheel...
|
Re: Pinion disassembly, frame mount PDS
How did you end up getting the pinion out?
|
All times are GMT -5. The time now is 06:44 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.