|
Front End Alignment
I have 02 CC DS with a 6 inch Jakes spindle lift with a heavy duty front spring. It has about 1/2 inch of negative camber in each front wheel. I just replaced the bushings on the front spring and it got them straightened up to the point where I am now. I can not find any other adjustments for camber. Thanks for the help.
|
Re: Front End Alignment
The only adjustment for camber is to center the leaf spring so the camber is the same on both sides. There is no adjustment to set the camber to true 0.
To do any other adjustment than that you need an A Arm lift. |
Re: Front End Alignment
Thanks for the response. The new bushings cut the lean in half. It is not to bad now. I will have to live with it.
|
| All times are GMT -5. The time now is 11:20 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.