Buggies Gone Wild Golf Cart Forum
Page 1301 of 1782 « First < 30180112011251129112991300 1301 13021303131113511401 > Last »
Show 40 post(s) from this thread on one page

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Gas Yamaha (https://www.buggiesgonewild.com/forumdisplay.php?f=17)
-   -   Yamaha G8 Club - Please post! (https://www.buggiesgonewild.com/showthread.php?t=49288)

CAMPERCART2013 06-12-2014 07:22 AM
Re: Yamaha G8 Club - Please post!
 
sounds like cut off wheel is only option mason:shock:

Happy Birthday MAC:thumbup:

Mike Mac 06-12-2014 07:22 AM
Re: Yamaha G8 Club - Please post!
 
Drill 2 new holes and tap with 5/16"!

Think I'd take the whole rear end out of the car. Probably needs to come out anyway, clean it up, replace bad bolts, do the brakes etc.

Thanks Camp!!:thumbup:

thecurti 06-12-2014 07:36 AM
Re: Yamaha G8 Club - Please post!
 
Moe is that the Vegas motor?

moesdeals 06-12-2014 10:23 AM
Re: Yamaha G8 Club - Please post!
 
Quote:
Originally Posted by thecurti (Post 1039927)
Moe is that the Vegas motor?
Yes, it is my friend.

moesdeals 06-12-2014 10:27 AM
Re: Yamaha G8 Club - Please post!
 
Quote:
Originally Posted by Mike Mac (Post 1039923)
Drill 2 new holes and tap with 5/16"!

Think I'd take the whole rear end out of the car. Probably needs to come out anyway, clean it up, replace bad bolts, do the brakes etc.

Thanks Camp!!:thumbup:
Is there a torque setting for any of the rear end bolts? :help:

bokeasmowl 06-12-2014 10:41 AM
Re: Yamaha G8 Club - Please post!
 
Cut that thing off Jim. Is it the inner or outer sheave you're trying to get off?

wingysataday 06-12-2014 01:57 PM
Re: Yamaha G8 Club - Please post!
 
Guess who's on vacation until the 23rd? Don at plowmans!!ahhhh. Ok I put the rear clutch kit back on.
1. How do I know I'm at 45lbs torque? I have a torque wrench but I can't figure out how to stop the shaft from spinning when I tighten everything? I don't want to break any of the clutch pieces. I used an impact wrench

wingysataday 06-12-2014 03:00 PM
Re: Yamaha G8 Club - Please post!
 
Ok did a lap around the block. Clutch nut hasn't moved! New problem cart goes about 10mph slower.

Mr. Mike 06-12-2014 03:06 PM
Re: Yamaha G8 Club - Please post!
 
Wingy. You should just be able to put the cart in forward or reverse and that will lock up the secondary clutch.

Not sure why it's now running slower though?

Mike Mac 06-12-2014 03:14 PM
Re: Yamaha G8 Club - Please post!
 
Win, need pictures, but like Mike said, put in gear, and put brake on. I put the (secondary) nut on with an impact gun. Just guess on 50 #!!

Have you looked at the primary clutch for a problem?


All times are GMT -5. The time now is 05:21 AM.
Page 1301 of 1782 « First < 30180112011251129112991300 1301 13021303131113511401 > Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.