Changed settings now cart wont run
 

Hello I have an 2016 club car with the xct400 and the blue tooth module .
I made a change to slow the car down so the kids could drive.
Now i get an error "Global Shutdown" "Bad VAR" .
Cart will not move I have tried to change back .
I also cant change user from 3th one .

using stock Motor

,I am going to grab a cable to try to change active user back to normal using computer instead of blue tooth module.

Is there a list or a file I can load to set the controller back to the way it was when a purchased it. (From Scotty B)

Thanks

Charlie

Re: Changed settings now cart wont run
 

Do not choose default settings. This controller works for ezgo TXT48 and club car IQ. The only difference is the throttle setting and the field map. The defaults in this control are EZGO throttle and field map.
If you did or must reset to default reset the throttle to MCOR and the field map to whatever matches the cart motor.

Attached are the most common CC maps
Unimap will work with virtually any motor.

Re: Changed settings now cart wont run
 

Thank you for your quick reply.

I reset the controller installed the posted field map and changed throttle setting as suggested . Everything is working again .

You saved my weekend!

Charlie

Re: Changed settings now cart wont run
 

There is that neat little Donate button at the top of the page :mrgreen:

Re: Changed settings now cart wont run
 

Done!