Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   Power Wise+, parts help, needed (https://www.buggiesgonewild.com/showthread.php?t=29055)

stormwatcher 02-11-2010 12:30 PM

Power Wise+, parts help, needed
 
My charger quit working. I jumpered around the breaker on the on/off sensor board, part # 28126-GO 4, and the charger worked. I removed the board, and it looks like a resistor is bad [burnt]. Maybe breaker also.

Does any one know what the value of this resistor is, or the bands colors are.
The resistor is the R1 on the board. I can't tell what the colors on mine are or were.

I would like to try and fix this one before I buy another board or charger.
Also what is the part # for the breaker.

Thanks all
Earl

http://i37.photobucket.com/albums/e5...20cart/017.jpg

http://i37.photobucket.com/albums/e5...20cart/018.jpg

mikesmotortoys 02-11-2010 12:35 PM

Re: Power Wise+, parts help, needed
 
I've never tried to repair the boards - we replace them...

hitmanharleyk 02-11-2010 08:08 PM

Re: Power Wise+, parts help, needed
 
Buy a board, had the same issue a few months back and I ended up doing the same thing. Looked but never could find anyone who had the parts or would repair mine.

Wynelocked 02-12-2010 02:20 PM

Re: Power Wise+, parts help, needed
 
Why cant you just look at a picture of a new board...check out the risister colors...write them down.Then just go to RadioShack an buy one?

Wynelocked 02-12-2010 02:21 PM

Re: Power Wise+, parts help, needed
 
Quote:

Originally Posted by mikesmotortoys (Post 358744)
I've never tried to repair the boards - we replace them...

But isnt that possible Mike?Especially with an obvious burnt risister.

hitmanharleyk 02-12-2010 10:23 PM

Re: Power Wise+, parts help, needed
 
Quote:

Originally Posted by Wynelocked (Post 359525)
But isnt that possible Mike?Especially with an obvious burnt risister.

I would figure that the resistor burnt because of another problem like a stuck contact switch or whatever it is called. Something made it get hot !

Buy the time you chased down, located the parts and replaced all of the possible problems, you'd be better off just replacing the board.

stormwatcher 02-13-2010 09:41 AM

Re: Power Wise+, parts help, needed
 
thanks guys, I know that I will probably buy a new board, but I would like to see if I could fix this one, just to see if it can be done.
The relay could also be bad, and if I could find one of them, I will replace it also.

Again, Thanks
Earl

GUNNY 02-13-2010 09:50 AM

Re: Power Wise+, parts help, needed
 
I would bring it down to radio shack, they use to have a color wheel pocket guide for resistors, was like $1.00, they are the quickest to fix, easy.



Gunny:thumbup:

Wynelocked 02-13-2010 10:29 PM

Re: Power Wise+, parts help, needed
 
Quote:

Originally Posted by hitmanharleyk (Post 359831)
I would figure that the resistor burnt because of another problem like a stuck contact switch or whatever it is called. Something made it get hot !

Buy the time you chased down, located the parts and replaced all of the possible problems, you'd be better off just replacing the board.

But if it burnt because of a problem...not board related...you're back in the same boat.

stormwatcher 03-21-2010 01:44 PM

Re: Power Wise+, parts help, needed
 
OK, I ordered a new board, and it should be here any day now. I found one for $49.95 Suppose to be new.

Thanks everyone
Earl


All times are GMT -5. The time now is 06:28 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.