Liberty - LSV Pigtail in Dash
 

Has anyone noticed a pigtail behind the instruments labeled "LSV"? I'm guessing that stands for low speed vehicle. Wondering if this is some future plan to enable 25 mph, lsv mode. Its just two wires (green and peach) with female spade terminals on the ends. They're both capped off. Assuming this is for a switch, like rabbit / turtle.

https://i.postimg.cc/r0dccSCq/IMG-6967.jpg



https://i.postimg.cc/0MLvNbcD/IMG-6968.jpg



Just probing around, I found that the green wire has continuity with a wire near the controller that's just terminated in a male spade. This wire is black though.

https://i.postimg.cc/DWwnpVSJ/IMG-6969.jpg



The peach wire goes to the fuse box. It appears to be the same wire. There is an empty fuse slot and nothing is mentioned in the owners manual for that slot.

https://i.postimg.cc/JHZLHM2g/IMG-6970.jpg





If I could do whatever I wanted without fear of borking the controller, I would stick a fuse in that box and short the wires in the dash and near the controller. But I'm not planning on doing that. Any thoughts on this?

Re: Liberty - LSV Pigtail in Dash
 

What controller is in the cart ?

Re: Liberty - LSV Pigtail in Dash
 

The controller model number is hidden by an access cover. I’ll try to get at it tonight.

Re: Liberty - LSV Pigtail in Dash
 

The controller is a Curtis 1206AC.

Re: Liberty - LSV Pigtail in Dash
 

I made a 1309 cable detailed in a different thread. Was able to set the speed to 25 mph using the programming station software. So, I won't be messing with this any more. Thanks.

Re: Liberty - LSV Pigtail in Dash
 

Glad you figured it out. When you were in the software menus did you see sections for multiple modes?

Re: Liberty - LSV Pigtail in Dash
 

Yes. Looks like there are 5 defined modes. Mine is in mode 5, which is freedom.

Here is a snap of an excel parameter export.
https://i.postimg.cc/ts1NFFZV/Screen...54-m-YAFne.png

Re: Liberty - LSV Pigtail in Dash
 

At one time I think someone was working on a was to switch modes on the fly for that controller by applying pack voltage to a currently unused pin in the harness. It would basically switch you to one of the other 4 modes. Could be why you have those extra wires in the dash..

Re: Liberty - LSV Pigtail in Dash
 

Do you mind sharing the link to the thread. I tried to reply to your messages you sent me from my inbox but your inbox is full.

Re: Liberty - LSV Pigtail in Dash
 

The link.. https://www.buggiesgonewild.com/show...15316&page=119