1982 ezgo won't go
 

Problem: new solenoid - 36V to non-live side of solenoid turns motor, F/R works, speed control works while solenoid jumped - solenoid works fine in another cart - no response with normal connections. Microswitch seems to do it's job - small terminals on solenoid seem to read ok after throttle pushed. All readings seem to match another EZGO except no joy in normal mode. Any suggestions are appreciated. Thanks.

Re: 1982 ezgo won't go
 

Check all cables, is it wired up right?Sounds like somethings bad in the wiper or not hooked up right.These old electric are notorious for bad wiper boards and resistors.Also make sure the batteries are fully charged.

Re: 1982 ezgo won't go
 

Thanks - I have determine that the solenoid is not getting 36V - will trace all supply wires and switches.