Valve adjustment
I was hoping someone out there could advise me on the proper way to make valve adjustment on a Yamaha G-8. I understand the setting is .004 and made when cold, but, I'm not sure if the adjustment is made at TDC or when the opposite valve is in compression or somewhere else.
Thanks, George |
Re: Valve adjustment
TDC with both valves closed
|
Re: Valve adjustment
Thanks for the assist
George |
Re: Valve adjustment
is that the same for a g9? 0.04'' at tdc with them closed?
thanks for any help! |
Re: Valve adjustment
It is the same for any internal combustion engine :thumbup:
|
Re: Valve adjustment
Quote:
|
Re: Valve adjustment
thanks guys
|
Re: Valve adjustment
hey guys were is that adjustment made, i opened up my g9's valve cover and can't figure out were to measure???
|
Re: Valve adjustment
were do you measure the 0.004'' @ tdc under the valve cover??
i've got my cover off but don't know were to measure. oops sorry double post! |
Re: Valve adjustment
Saber cat put the tools down and think for two seconds. Do you have a feeler gauge or a micrometer.
|
All times are GMT -5. The time now is 01:13 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.