Buggies Gone Wild Golf Cart Forum

Buggies Gone Wild Golf Cart Forum (https://www.buggiesgonewild.com/index.php)
-   Electric EZGO (https://www.buggiesgonewild.com/forumdisplay.php?f=16)
-   -   Ezgo Workhorse (https://www.buggiesgonewild.com/showthread.php?t=175080)

fabricator 04-16-2021 04:56 PM

Ezgo Workhorse
 
2 Attachment(s)
Any one know where to find the year of this cart?And the right wiring diagram. Thanks

JohnnieB 04-16-2021 07:41 PM

Re: Ezgo Workhorse
 
1 Attachment(s)
Look on the side of the passenger side glove box.

Look at the frame cross member under the front flap of the center cover over the motor. (Circled in attached picture)

fabricator 04-16-2021 08:41 PM

Re: Ezgo Workhorse
 
1 Attachment(s)
Thanks. 2008 maybe? See pic

fabricator 04-16-2021 09:31 PM

Re: Ezgo Workhorse
 
Quote:

Originally Posted by JohnnieB (Post 1819616)
Look on the side of the passenger side glove box.

Look at the frame cross member under the front flap of the center cover over the motor. (Circled in attached picture)

Found it. See above picture.
Confused though. Tag says it is a MPT1000. Everything I read about the 1000 is that it’s a 48v system. It has 6 six volt Trojans in it?

kernal 04-16-2021 10:13 PM

Re: Ezgo Workhorse
 
I just glanced through an owners manual on line(starting model year 2004). Looks like it could be either. Also looks like it could be "series" or PDS. The label you photographed lists the motor as 1.87KW (2.5 HP). That is the same motor/rating as came in my TXT shuttle that was a 36v "series" system. I wouldn't assume it is supposed to be 48v without further investigation.

fabricator 04-17-2021 05:40 AM

Re: Ezgo Workhorse
 
Anyone have a link for a wiring diagram for this cart?

meimk 04-17-2021 06:22 AM

Re: Ezgo Workhorse
 
Quote:

Originally Posted by kernal (Post 1819633)
I wouldn't assume it is supposed to be 48v without further investigation.

Looks like a 48 volt charger socket in the above picture.

kgsc 04-17-2021 09:25 AM

Re: Ezgo Workhorse
 
Try manual 28838-g01 As for voltage check the solenoid

JohnnieB 04-17-2021 04:19 PM

Re: Ezgo Workhorse
 
Quote:

Originally Posted by fabricator (Post 1819642)
Anyone have a link for a wiring diagram for this cart?

Need to find out which drive system is in it.

The label says it is a MPT-1000, which is a 48V Sepex drive, but you say it has six 6V batteries, so it might be a series drive.

Is there a Run/Tow switch on the controller cover? if there is, it is a sepex drive and somebody is running a 48V system on 36V.

Hoe about some pictures under the seat. Batteries and controller and area in front of controller.

fabricator 04-19-2021 02:34 AM

Re: Ezgo Workhorse
 
2 Attachment(s)
Thanks everyone for your help. This is a 48v system. Didn’t think to look under the bed for 2 more spots for batteries. Does have a run tow switch. When I bought this, the guy said that it needs a switch. Didn’t say which one. He was kind enough to give me a box with all of the switches in it. Everything is unplugged. At least the wiring isn’t cut. I am sure that I will have more questions when I get batteries. Switch on the left I haven’t a clue what it goes to?


All times are GMT -5. The time now is 05:53 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.