Re: axle bearing and seal replacement.
4 Attachment(s)
Quote:
Attachment 225777Attachment 225776 Here is a update: passenger side rear axle bearing was prefect to install : But driver rear axle bearing mystery grooves, bearings is too thick. See pictures Attachment 225776 Attachment 225777 |
Re: axle bearing and seal replacement.
Quote:
|
Re: axle bearing and seal replacement.
i'm starting to replace my axle bearings on a 1994 electric marathon. I tried the reverse brake drum to get the axle out, no luck. I"ve ordered a slide hammer. The mfg repair manual says to screw the slide hammer into the threaded hole in the axle. i need to find what size the bolt is. so far i haven't found a bolt to fit it. Or could i leave my loosened brake hub on and connect the slide hammer to the lugnuts? thanks.
|
Re: axle bearing and seal replacement.
if you do use a slide hammer, what do you hook it to? 1994 electric marathon, my studs are on the brake drum. anyone know what size the screw hole is in the center of the axle. I read something saying screw the slide hammer end into that. so far i haven't gotten my axle out. it's cold and keeps raining.
|
Re: axle bearing and seal replacement.
Most slide hammers come with a set of fingers or a bracket that screws on then you can hook that to the nut or hub.
|
Re: axle bearing and seal replacement.
I made a slide hammer for Ezgo axles. I welded an axle castle nut on the end.
I have heard you can put the drum on backwards and thread the nut on leaving some space to use the drum as a slide hammer. Never tried it as I had a proper tool but it sounds like it would work. |
Re: axle bearing and seal replacement.
I got my axil out and finally the old seal off my 1994 marathon. everything seems hard on that golf cart. It has looks like iron filings in the axle housing. I thought it was dirt at first but it sticks to a magnet. how can i clean out the axle housing? thought about running a magnet inside the housing. don't want to knock the metal into the differential though. i'm going to change the fluid also when i get finished with the bearings.
|
Re: axle bearing and seal replacement.
Quote:
|
Re: axle bearing and seal replacement.
Using 90w made my cart much quite.
|
All times are GMT -5. The time now is 12:16 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.