Lost Low End Torque..
Guys, have a 94 EzGo lifted that lost quite a bit of low end torque and will not pull some of the hills that it use to. The drive clutch was slipping so we replaced that. I put a 28* driven clutch on same with a severe duty belt. Still no change. It seems like it's just not opening up when put under a load. So I gauged the valves, check compression and everything checked out just fine.. Can you guys send me some other ideas to help me out!
|
Re: Lost Low End Torque..
Free bump.. brakes hanging up?
|
Re: Lost Low End Torque..
Does the driven clutch require prewrap and if so you could try adding more
|
Re: Lost Low End Torque..
Just had this same issue on a 2005 ezgo. On mine it was a bad Voltage regulator, it can Full Field the generator.
|
All times are GMT -5. The time now is 04:31 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.